4.3
Replacement Procedure
•
Perform sections 2.1 - 2.4 of the disassembly procedure.
1. Using a pry tool, pry the receiver from its
location in the old front cover using the tab on
the side of the receiver as the prying location.
2. Obtain a new receiver.
3. Obtain a new front cover.
4. Position the new receiver in the new front
cover's receiver cavity so that the tips of
receiver's spring fingers are pointing toward the
display window.
3/00021-1/FEA 209 544/112 A
Company Internal © Sony Ericsson Mobile Communications AB
Front Cover
Step-by-Step Instructions
Working Instruction, Mechanical
34(74)