Conair 100 User Manual page 104

C - 5 l A p p e n d i x
C l e a n i n g t h e A f t e r c o o l e r
9
Connect the water supply line to the aftercooler / precooler inlet. If a manual
shut off valve is used, it should be mounted on the inlet line as well.
10
Connect the outlet of the aftercooler / precooler to the inlet of the flow control
valve using the pre-shaped copper tubing and compression fittings provided.
11
Install the plastic aftercooler/precooler cover.
12
Turn on the flow control option through your control.
( c o n t i n u e d )