Conair 100 User Manual page 103

C l e a n i n g t h e A f t e r c o o l e r
5
Remove the aftercooler assembly from the aftercooler housing.
6
Clean the aftercooler assembly using a mild soap and water. Let the after-
cooler dry thoroughly before installation.
CAUTION: During the cleaning process, DO NOT cut or remove the stainless
steel wire that holds the aftercooler assembly together.
7
Inspect the condition of the gasket. If it is damaged, replace the gasket.
8
Reassemble by repeating the steps in reverse order.
( c o n t i n u e d )
(continued)
A p p e n d i x l C - 4