Recording Features - JVC HR-S9400E Instructions Manual

Hide thumbs Also See for HR-S9400E:
Table of Contents

Advertisement

24
EN
Recording
Fea tures
C.RESET
AU D IO M O N ITO R
M EN U
PU SH JO G
Ta pe Rem a ining Time
DISPLAY REMAIN IN G TIME
Press D ISPLAY until the time remaining on the tape
1
appears.
● By pressing the
display to show the counter reading, channel
position*, clock time or tape remaining time.
* channel position is not displayed during playback.
N O TE:
Depending on the type of tape used, there may be times when
the tape remaining time reading may not appear right away, or
is not correct. "- - : - -" may sometimes appear, or the display
may blink on occasion.
Downloaded from:
https://www.usersmanualguide.com/
RECO RD
D ISPLAY
2
1
2
3
4
5
6
7
8
9
0
4
TV PRO G
O K
D ISPLAY button, you can change the
Record O ne Progra mme
W hile W a tching Another
If your recorder is connected to the TV via AV connection, . . .
. . . press TV/ VCR . The recorder's VCR indicator and the TV
broadcast being recorded disappear.
SELECT CHAN N EL TO
WATCH
1
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
8
● The programme selected with the TV's channel
controls appears on the TV screen while the one
selected with the recorder's TV PRO G buttons is
recorded on the tape.
● If a decoder is connected to the recorder (
you can select a scrambled channel as well with the
TV channel controls.
Ela psed Recording Time
Indica tion
You can check the exact time of a recording.
SET CO UN TER DISPLAY
Press D ISPLAY until a counter reading appears on the
1
dispay panel.
RESET CO UN TER
Press C. RESET before starting recording or playback.
2
● The counter is reset to " 0:00:00" and shows the exact
elapsed time as the tape runs.
Insta nt Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
ST ART RECO RDIN G
1
Press RECO RD on the recorder.
EN GAGE ITR MO DE
Press RECO RD again. " " blinks and 0:30 appears on
2
the front display panel.
SET RECORDIN G DURATION
If you want to record for more than 30 minutes, press
3
RECO RD to extend the time. Each press extends
recording time by 30 minutes.
N O TE:
You can only perform ITR using the RECO RD button on the
recorder's front panel.
RECO RD IN G (cont.)
pg. 45),

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-s9400eh

Table of Contents