Table of Contents
Advertisement
Recording
Fea tures
D ISPLAY
Ta pe Rem a ining Tim e
DISPLAY REMAIN IN G TIME
1
Press D ISPLAY until the time remaining on the tape
appears.
● By pressing the
display to show the counter reading, preset position,
clock time* or tape remaining time.
* Preset position is not displayed during playback.
N O TE:
Depending on the type of tape used, there may be times when
the tape remaining time reading may not appear right away, or
is not correct. "- - : - -" may sometimes appear, or the display
may blink on occasion.
Downloaded from:
https://www.usersmanualguide.com/
q
1
2
3
4
5
6
7
8
9
/
C. RESET
0
4
2
TV PRO G.
1
3
¡
¶
7
8
1
4
¢
3
D ISPLAY button, you can change the
Record O ne Progra mme
W hile W a tching Another
SELECT PRESET TO WATCH
1
Once recording is in progress, all you need to do is to
set the preset controls on the TV for the station you
wish to view.
● The programme selected with the TV's preset controls
appears on the TV screen while the one selected with
the recorder's TV PRO G . buttons is recorded on the
tape.
¢
¢
Ela psed Recording Time
¡
1
Indica tion
You can check the exact time of a recording.
SET CO UN TER DISPLAY
1
Press D ISPLAY until a counter reading appears on the
dispay panel.
RESET CO UN TER
2
Press C. (CO U N TER) RESET before starting recording or
playback.
● The counter is reset to " 0:00:00" and shows the exact
elapsed time as the tape runs.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
ST ART RECO RDIN G
1
Press RECO RD on the recorder.
EN GAGE ITR MO DE
2
Press RECO RD again. " " blinks and 0:30 appears on
the front display panel.
SET RECO RDIN G
DURATIO N
3
If you want to record for more than 30 minutes, press
RECO RD to extend the time. Each press extends
recording time by 30 minutes.
N O TE:
You can only perform ITR using the RECO RD button on the
recorder's front panel.
19
Advertisement
Table of Contents
