I Troubleshooting The Connection To The Iaqualink™ App - Zodiac WR000411 Installation And User Manual

5.4 I Troubleshooting the connection to the iAquaLink™ app
Connectivity status
• The LED is
off.
• Appliance not charged
• Appliance not connected
to Wi-Fi and/or internet
• The LED is
connection lost
on but the Wi-Fi
connection is non-
existent (or spotty).
The "Connection
• Weak Wi-Fi signal*
Error" message
is displayed on
the screen in the
iAquaLink™ app.
• A red dot appears
in the "My
appliances" list
• The LED is
• A software update is in
blue and blinks
quickly. A message
progress.
is displayed in the
app.
*There may be several reasons for a weak Wi-Fi signal
- The distance between the router and cleaner,
- The type of router (box),
- The number of walls separating the router and the cleaner,
- The Internet service provider,
- etc.
Possible causes
• Check the internet connection - the network may be down.
• Ensure that you have a sufficiently strong Wi-Fi signal. There
are several ways to check the strength of the Wi-Fi signal:
- Unplug the home Wi-Fi router, then plug it back in.
- Using a laptop, go into Configuration Panel to see the
- Install the iAquaLink™ app, using a smartphone or tablet.
- Use an app dedicated to analysing the Wi-Fi connection:
• On first set-up, place the cleaner as close as possible to the
home Wi-Fi router then repeat the configuration steps (see
"3.1 I First-time cleaner configuration").
• If the
extender.
• If the dot is red when the cleaner is charged, the connection
is working and the LED is on steady, refresh the screen
(by swiping downwards). When the dot turns green: The
appliance is ready for use.
• Wait for the update to complete.
Solutions
status of your network connections. Check the strength
of the Wi-Fi network signal on a laptop.
Check the strength of the Wi-Fi network signal. If the Wi-
Fi network is weak, install a Wi-Fi extender.
several are available in iOS or Android.
LED does not stop blinking, install a Wi-Fi
EN
27