Section 5. Troubleshooting; Using The Information Led - Zodiac CyclonX EM14 Series Owner's Manual

2
Figure 22. Stretch Track Around Wheels
5. Verify the rib of the track is positioned properly
within the groove of each of the three wheels
and under the track guide. If necessary, turn the
wheels gently to seat the track.

Section 5. Troubleshooting

5.1

Using the Information LED

The information LED
in a specifi c sequence to indicate one of three possible
cleaner malfunctions.
LED Flashing
1 Flash
LED fl ashes once
2 Flashes
LED fl ashes twice
3 Flashes
LED fl ashes three
12
1
3
on the Control box fl ashes
Cause
Floating cable may not be plugged
into the Control box correctly.
Cleaner wheels may be jammed
or brushes may be blocked with
debris.
Pump axis or propeller may be
jammed with debris.
Dirty fi lter.
Solution
Unplug the fl oating cable from the
Control box and reconnect.
If the problem persists, contact
Zodiac After Sales Support at
1300 763 021
Turn cleaner wheels to ensure
they are not jammed.
Check brushes for debris.
Start a new cleaning cycle.
If the problem persists, contact
Zodiac After Sales Support at
1300 763 021.
Check the pump axis for debris.
Check propeller for debris.
Clean the fi lter.
Start a new cleaning cycle.
If the problem persists, contact
Zodiac After Sales Support at
1300 763 021.
H0446500_REVB