I Removing The Cleaner From The Water - Zodiac WR000411 Installation And User Manual

2.6 I Removing the cleaner from the water

•
Using the pole, you can remove the cleaner during the cycle and the cleaner will stop automatically
once it is out of the water.
•
At the end of a cycle, the cleaner always stops at the foot of a side.
2.6.1 Without the iAquaLink™ app
• During the last ten minutes of the cycle, the cleaner will successively climb the various sides and wait at the waterline
until it is recovered using the handle (
• If it is not retrieved at this time, the cleaner at the foot of a side at the end of the cycle (
• Attach the hook (supplied) to the end of a pool pole (not supplied) (
• Catch the cleaner handle with the hook and raise the cleaner to the surface (
• Use the handle to take it out of the water. The cleaner expels water through a rear jet to make it lighter (
) (not available in the "Floor only" mode).
).
).
).
EN
)
.
14