Adjusting The Picture; Picture Mode, Contrast - Panasonic PT-AE500U Operating Instructions Manual

Adjusting the picture
Press the • or • button to select an
item, and then press the <1 or •
button to change the setting.
For items with bar scales, press the
ENTER button or the < or • button
to display the adjustment screen,
and then press the < or • button to
make the adjustment.
For items without any selective
arrow or bar scale, press the ENTER
button. The menu screen for the item
will then be displayed.
When an S-VIDEO/VIDEO signal is
being input
PICTURE
CONTRAST O
BRIGHT O
COLOR O
TINT O
SHARPNESS O =_
COLOR TEHP. 4 O
AI 4 OFF
ADVANCE HENU
HEMORY BAUE
HEMORY LOAD
TV--BYBTEH 4 AUTO
SELECT _)ADJ I_EBC
When a YPBPRIPC signal is being
input
PICTUBE
II! III _l lllOlll _ I • 111 _ll_ll I
CONTRAST O
BRIGHT O
COLOR O
TINT O
SHARPNESS O
COLOR TEHP. 4 O
AI 4 OFF
ADVANCE HENU
HEMORY BAUE
HEMORY LOAD
SIGNAL HODE 525I
SELECT _)ADJ I_EBO
When a DVI signal is being input
PICTURE
CONTRAST O
BRIGHT O
SHARPNESS O
COLOR TEMP. 4 O )
AI 4 OFF
ADVAHBE HENU
HEMORY SAVE
HEMORY LOAD
GNAL HODE XGA
_IBELECT _,ADJ li_ESO
PICTURE MODE
Refer to page 27 for details.
CONTRAST
This adjusts the contrast of the
picture. (Adjust the "BRIGHT"
setting first if required before
adjusting the "CONTRAST" setting.)
The picture is bright: < button
The picture is dark: • button
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: < button
Dark areas are too solid: • button
COLOR
(S-VIDEO/VIDEO/YPBPR/PC only)
The color is too deep: < button
The color is too pale: • button
TINT
(NTSC/NTSC 4.43/YPBPR/PC only)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish: < button
The flesh tones are reddish: • button
SHARPNESS
To soften the picture details: < button
To sharpen the picture details: • button
COLOR TEMP.
[COLOR TEMP.
' '"1
"
"/
" "I
14 +I ,I I
J4 +$_ H"-i
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
AI
The lamp is controlled according to
the input signals to project images
with the best quality.
AI-1 For image sources with many
dark scenes such as movies.
AI-2 For image sources with many
bright scenes such as general
programs.
OFF "Ar' is disabled.
ADVANCE MENU
Picture settings can be adjusted in
more detail.
Press the ENTER button to display
the "ADVANCE MENU"
ADVANCE MENU
GAMMA HID O
GAMHA LOW O
CONTRAST R O
CONTRAST G O
CONTRAST B O
BRIGHT R O
BRIGHT G O
BRIGHT B O
BELEOTm_ENTER I_EBO
"GAMMA HIGH/MID/LOW" is used
for correcting the gradation of a
bright or dark projected image.
• Adjust "GAMMA HIGH" mainly to
correct the gradation of a bright
projected image.
• Adjust "GAMMA LOVe' mainly to
correct the gradation of a dark
projected image.
"CONTRAST R/G/B" and "BRIGHT
R/G/B" are used for correcting the
color temperature in more detail.
• Adjust "CONTRAST R/G/B"
mainly to correct the white areas
of the projected image.
• Adjust "BRIGHT R/G/B" mainly to
correct the black areas of the
projected image.
36-ENGLISH ENGLISH-37