Table of Contents
Advertisement
Setting-up positions and changing the projection method
The projection method used by the projector can be changed in accordance with the setting-up position.
At the time of shipment from the factory, the projector is set to the " FRONT" projection method, but this can be
changed if required.
Setting procedure
1. Press the MENU button to display the MENU screen.
2. Press the " " and " " buttons to select "OPTION" .
3. Press the "<" and ">" buttons to display the OPTION screen.
4. Press the " " and " " buttons to select "SET UP" .
5. Press the "<" and ">" buttons to display the SET UP screen.
6. Press the " " and " " buttons to select "FRONT/REAR
7. Press the "<" and ">" buttons to select "FRONT" or "REAR" .
FRONT mounting
(Setting condition at the time of
shipment from the factory.)
REAR mounting
NOTE:
The adjustment screen and the MENU screen can both be cleared by pressing the MENU button.
17
Advertisement
Table of Contents
