Options Menu - DSC neo HS2TCHPN User Manual

Time & Date Programming
Tap on Options. Select User Functions [Master Code] and then select Time & Date. Tap on the section you would
like to change and use the up/down arrows to change time/date. Once done, press Save.
Keypad Mode
This option allows the HS2TCHP Touchscreen to function as a traditional DSC keypad.
Door Chime (Chime enable/disable)
The keypad indicates the current state of the door chime function (Enabled or Disabled). To choose the opposite
function, tap the 'Chime' icon. Three beeps indicate that the chime is ON (Enabled). One long beep indicates that
chime is OFF (Disabled).
Note: The door chime feature should be used in Disarmed mode only.
Zone Status
This screen allows you to view the status of the zones on the system.
Zone Status Indicators
Ready Zone is closed
Open The zone is open and needs to be closed

Options Menu

Access the following functions by pressing Options on the right side of the home page. See the online HS2TCHP
User Manual for more information.
Access Codes
l
Installer Menu
l
User Functions
l
Chime Enabled/Disabled
l
Partition Status
l
Keypad Mode
l
Access Codes
For more information, see the online HS2TCHP User Manual.
User Functions
Access the following user functions by pressing Options + User Functions + [Access Code]. For more information,
see the online HS2TCHP User Manual.
Keypad Configuration
The following options can be configured:
Display Options:
sets the brightness and screen timeout of the Touchscreen, as well as screen saver options.
Buzzer Control:
sets the buzzer volume of the Touchscreen. Note: For SIA CP-01, the buzzer volume shall not
be placed at the minimum setting.
Note: For UL/ULC installations, the buzzer level shall not be changed from the default level.
- 7 -
Options Menu