Intrusion (Burglary) Alarm Continuous Siren; Fire Alarm Pulsed Siren; Wireless Carbon Monoxide Alarm; Additional Options - DSC PTK5507 User Manual

Intrusion (Burglary) Alarm Continuous Siren

f you are unsure of the source of the alarm, approach with caution! If the alarm was acciden-
I
tal, enter your Access Code to silence the alarm. Call your central station to avoid a dispatch.

Fire Alarm Pulsed Siren

Follow your emergency evacuation plan immediately!
If the fire alarm was accidental (e.g., burned toast, bathroom steam, etc.), enter your Access Code to
silence the alarm. Call your central station to avoid a dispatch. Ask your alarm company if your system
has been equipped with fire detection. To reset the detectors, see the Sensor Reset section.

Wireless Carbon Monoxide Alarm

Activation of your CO alarm indicates the presence of carbon monoxide (CO), which can be fatal. Dur-
ing an alarm, the red LED on the CO detector flashes rapidly and the buzzer sounds with a repeating
cadence of: 4 quick beeps, 5-second pause, 4 quick beeps. Also, during an alarm, the siren connected to
the control panel produces a repeating cadence of 4 quick beeps, 5-second pause, 4 quick beeps. The
keypad will also provide audible and visual indication of the CO alarm.
If an alarm sounds:
1. Operate silence button.
2. Call emergency services or your fire department.
3. Immediately move outdoors or to an open door/window.
WARNING: Carefully review your Carbon Monoxide Installation/User Guide to determine the
necessary actions required to ensure your safety and ensure that the equipment is operating cor-
rectly. Incorporate the steps outlined in the guide into your evacuation plan.

Additional Options

Photos

NOTE: For best results, photo resolution should be 800 x 480; please use photo-editing computer
software to adjust your photos to the correct size. Photos larger than 1280 x 720 cannot be dis-
played by the Touchscreen.
When Photos is selected:
• The photos play automatically from the list of photos on your SD card.
• Tapping the screen once will bring you back to the home page.
Photo Settings
WARNING: Disassembling the keypad without first removing the SD card will cause damage to
the unit.
Selecting Picture Frame from the Keypad Configuration menu will allow you to select the pictures for
the slide show. You can also program the Transition Time between photos and the duration for the Photo
Frame Timeout on this screen.

Quick Exit

If the system is armed and you need to exit, use the quick exit function to avoid disarming and rearming
the system. To activate this function, tap the Quick Exit icon. You have 2 minutes to leave the premises
through your exit door. When the door is closed again the remaining exit time is cancelled.
Time & Date Programming
Tap on Options. Select User Functions [Master Code] and then select Time & Date. Tap on the section
you would like to change and use the up/down arrows to change time/date. Once done, press Save.

Keypad Mode

This option allows the PTK5507 Touchscreen to function as a traditional DSC keypad.

Door Chime (Chime enable/disable)

The keypad indicates the current state of the door chime function (Enabled or Disabled). To choose the
opposite function, tap the 'Chime' icon. Three beeps indicate that the chime is ON (Enabled).One long
beep indicates that chime is OFF (Disabled).
6