Quick Start - DSC neo HS2TCHPN User Manual

Quick Start

Description:
Method:
Away Arm
Indications:
Description:
Method:
Stay Arm
Indications:
Description:
Method:
Disarm
Indications:
Description:
Bypass Method:
Indications:
Description:
View Alarms Method:
Indications:
Description:
Method:
View Troubles
Indications:
Description:
Method:
Perform
System Test
Indications:
Description:
Method:
Set Time/Date
Indications:
Description:
Turn Chime Method:
On/Off
Indications:
Description:
Change screen
Method:
brightness
Indications:
Description:
Change Buzzer
Method:
Volume
Indications:
Arming
Arms all interior and exterior sensors
Press anywhere on the top banner of the home page
The Armed ( ) LED lights. Top banner turns red and displays "Armed". Exit
delay timer starts.
Arms all exterior sensors. Does not arm interior sensors
Press Stay Arm button
Armed ( ) LED lights. Top banner turns red and displays "Armed"
Deactivates all interior and exterior sensors
Press anywhere on the top banner of the home page
Ready ( ) LED lights. Top banner turns green and displays "Disarmed"
Excludes selected zones from activating the alarm when the system is armed
Press Zone Status to display available zones, then press the Bypass button
beside a zone
The Bypass button changes to Unbypass
Common Functions
View which zones have triggered alarms
Press the ! button (visible if an alarm has occurred)
The ! button is displayed at the top, right side of the screen
View system troubles
Press the ! button (visible if an alarm has occurred)
The ! button is displayed at the top, right side of the screen
Tests the keypad sounder, siren, status lights and backup battery
Options + User Functions + [Access Code] + System Test
Sounder and siren activate for 2 seconds, all lights turn on, Ready, Armed and
Trouble lights flash for duration of test
Adjusts the time and date displayed on the home page
Options + User Functions + [access code] + Time & Date. Press the section you
want to change (e.g., Hrs) then use the arrow keys to change the value. Press
Save
Changes are displayed in the top, right corner of the home page
Turns the door chime function on/off
Press Chime
On: sounder emits 3 short beeps. Chime icon displays a checkmark.
Off: sounder emits 1 long beep. Chime icon displays an X.
Adjusts the brightness and contrast of the touchscreen
Options + User Functions + [Access Code] + Keypad Config + Display Options
Use the sliders to increase or decrease the screen brightness
Screen brightness adjusts as the slider is moved
Adjusts the level of the keypad buzzer
Options + User Functions + [Access Code] + Keypad Config + Buzzer Control
Use the slider to increase or decrease the buzzer volume
The buzzer beeps at the selected volume level
- 3 -
Quick Start