Table of Contents
Advertisement
The measures of protection against
snowfall shall be taken.
In areas where lots of snow accumulates, the
weight of snow may cause the product to fall
resulting in injury or accidents. Protect the product
against snowfall by installing under eaves.
The screws and fixed parts must be
securely tightened.
Failure to observe this may cause the product
to fall resulting in injury.
The measures of protection against a fall
of this product shall be taken.
Failure to observe this may cause a drop
resulting in injury or accidents.
Do not damage the power cable.
Do not damage, fabricate, twist, stretch,
bundle, or forcibly bend the power cable. Do
not place heavy objects.
Keep away from heat sources.
Use of the damaged power cable may cause
electric shock, short circuit, or fire.
Consult the dealer for repair.
Turn the power off when cleaning this product.
Failure to observe this may cause injury.
When adjusting the angle, do not touch the
movable parts by hand.
Doing so may cause fingers to get caught,
resulting in an injury.
[Precautions for use]
This product has no power switch.
When turning off the power, turn off a circuit breaker.
To keep on using with stable performance
Parts of this product may deteriorate and it may
shorten the lifetime of this product when using
in locations subject to high temperatures and
high humidity. (Recommended operating
temperature: -10 °C - 50 °C)
Do not expose this product to direct heat
sources such as a heater.
Do not touch the front cover (transparent
cover) with your bare hands.
A dirty cover causes deterioration of picture
quality.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to this product.
Failure to observe this may cause trouble.
If a strong shock or vibration is applied to the
front cover, it may cause damage or allow
water to enter this product.
Noise on monitor
This product is equipped with a super sensitive
CCD. Therefore, noise may appear on the
monitor. This phenomenon is not trouble.
Discoloration on the CCD color filter
When continuously shooting a bright light
source such as a spotlight, the color filter of
the CCD may have deteriorated and it may
cause discoloration. Even when changing the
fixed shooting direction after continuously
shooting a spotlight for a certain period, the
discoloration may remain.
Do not aim this product at strong light
sources.
A light source such as a spot light causes a
blooming (light bleeding) or a smear (vertical
lines).
Smear
Blooming
Bright subject
9
Advertisement
Table of Contents
