Table of Contents
Advertisement
9. Other
9.17 Troubleshooting
・Is 554 configured for
the HTTP port
number?
・Is the set IP address
overlapping with other
devices?
Is there a conflict
between the
configured address
and the destination
network subnet?
55
・If the network
settings (IP address,
subnet mask, and
default gateway) are
incorrect, restart the
camera and change
the network settings
using the IP easy
configuration software
within 20 minutes.
・In an environment
without a DHCP
server, restart this
unit with the Initialize
button and initialize
it. The IP address is
set to 192.168.0.10.
Then access this unit
to reset the IP
address (which
initializes all settings).
・Use ports other than
20, 21, 22, 23, 25, 42,
53, 67, 68, 69, 110,
123, 161, 162, 443,
554, 995, 1883, 883,
10689, 10670,
59000-61000.
・Check the set IP
address.
User manual
-
Advertisement
Table of Contents
