Table of Contents
Advertisement
9. Other
9.17 Troubleshooting
(PTZ part)
The camera does not
face the position set.
(PTZ part)
Camera stops during
PAN/TILT operation
and makes mechanical
sounds.
(PTZ part)
Camera automatically
rotates
Cannot be accessed
from a Web browser
.
・The camera may be
out of orientation
from the set position.
・The camera may have
been misaligned.
・Noise may have an
effect.
・Position refresh
operation may be
performed
automatically to
increase the position
accuracy of PAN,
TILT, and ZOOM at
low temperature
startup. However,
this is not a failure.
・Are cables of
category 5e or higher
connected to the
network connector?
52
・The position is
corrected when
position refresh is
executed. When
position refresh is set
with the schedule
function, the camera
direction deviation
can be corrected
periodically. In some
cases, reset the
preset position.
・In the [Initialization]
tab of the Advanced
menu, refresh the
positions.
・Check for external
noise.
-
・Connect a cable with
Category 5e or higher.
User manual
User manual
User manual
-
Operation Manual
Installation
Advertisement
Table of Contents
