Registering A Unit; Registering Handset To Base Unit - Panasonic KX-TG6513B Operating Instructions Manual

Block calls without phone number
You can reject a call without phone
number including "Out of area",
"Private caller", or "Long
distance".
1
{MENU} i {#}{2}{4}{0}
2
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Viewing/editing/erasing call block
numbers
1
{MENU} i {#}{2}{1}{7}
2
{V}/{^}: Select the desired entry.
L To exit, press {OFF}.
3
To edit a number:
{EDIT} i Edit the phone number.
i {SAVE} i {OFF}
To erase a number:
{ERASE} i {V}/{^}: "Yes" i
{SELECT} i {OFF}
Note:
L When editing, press the desired dial
key to add, {CLEAR} to erase.
L When viewing, "Block w/o num" is
displayed if the block calls without
phone number feature is turned on. To
turn the feature off: {ERASE} i {V}
i {SAVE} i {OFF}

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L See page 6 for information on the
available model.
For assistance, please visit http://www.panasonic.com/help
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1
Handset:
{MENU} i {#}{1}{3}{0}
2
Base unit:
■ KX-TG6511 series: page 3
Press and hold {LOCATOR} for
about 5 seconds. (No registration
tone)
■ KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3
Press and hold {LOCATOR} for
about 5 seconds until the
registration tone sounds.
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed
within 90 seconds.
3
Handset:
Press {OK}, then wait until a long
beep sounds.
Note:
L While registering, "Base in
registering" is displayed on all
registered handsets.
L When you purchase an additional
handset, refer to the additional
handset's installation manual for
registration.
Programming
31