Greeting Message; Listening To Messages Using The Base Unit - Panasonic KX-TG6513B Operating Instructions Manual

Base unit
Available for:
KX-TG6541 series (page 3)
To adjust the speaker volume, press {^}
or {V} repeatedly. You can answer the
call by pressing {SP-PHONE}.
To turn off while screening a call, press
{V} repeatedly until the sounds goes off.
Note:
L If you adjust the speaker volume while
listening to messages or talking on the
intercom, the speaker volume for call
screening is turned on again.

Greeting message

When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting
message
1
{MENU} i {#}{3}{0}{2}
2
{V}/{^}: "Yes" i {SELECT}
3
After a beep sounds, hold the
handset about 20 cm (8 inches)
away and speak clearly into the
microphone (2 minutes max.).
4
Press {STOP} to stop recording.
5
{OFF}
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded
greeting messages:
– If you erase or do not record your own
greeting message, the unit plays a
For assistance, please visit http://www.panasonic.com/help
pre-recorded greeting asking callers
to leave a message.
– If the message recording time (page
41) is set to "Greeting only",
callers' messages are not recorded
and the unit plays a different pre-
recorded greeting message asking
callers to call again.
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded
greeting message once you record your
own greeting message, you need to
erase your own greeting message.
1
{MENU} i {#}{3}{0}{4}
2
{YES} i {OFF}
Playing back the greeting
message
1
{MENU} i {#}{3}{0}{3}
2
{OFF}
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Answering System
37