Special Programming - Panasonic KX-TG6513B Operating Instructions Manual

Special programming

Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
L Set the date and time beforehand
(page 15).
1
{MENU} i {#}{7}{2}{0}
2
{V}/{^}: Select the desired alarm
option. i {SELECT}
Turns alarm off. Go to
Off
step 7.
An alarm sounds once at
Once
the set time.
An alarm sounds daily at
Daily
the set time. Go to step
4.
3
Enter the desired month and date.
i {OK}
4
Set the desired time.
5
{AM/PM}: Select "AM" or "PM". i
{OK}
6
{V}/{^}: Select the desired alarm
tone. i {SELECT}
L We recommend selecting a
different ringer tone from the one
used for outside calls.
7
{SELECT} i {OFF}
L When the alarm is set, E is
displayed.
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
For assistance, please visit http://www.panasonic.com/help
Silent mode
Silent mode allows you to select a period
of time during which the handset will not
ring for outside calls. This feature is
useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for
each handset.
Important:
L Set the date and time beforehand
(page 15).
L We recommend turning the base unit
ringer off (page 17) in addition to
turning the silent mode on.
(KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3)
L If you have set the alarm, the alarm
sounds even if the silent mode is
turned on.
Turning silent mode on/off
1
{MENU} i {#}{2}{3}{8}
2
{V}/{^}: Select "On" or "Off". i
{SAVE}
L If you select "Off", press {OFF}
to exit.
3
Enter the desired hour and minute
you wish to start this feature.
4
{AM/PM}: Select "AM" or "PM". i
{OK}
5
Enter the desired hour and minute
you wish to end this feature.
6
{AM/PM}: Select "AM" or "PM".
7
{SAVE} i {OFF}
L When the silent mode is set, & is
displayed.
Note:
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
Programming
29