Remote Operation From A Touch Tone Phone - Panasonic KX-TG5210M Operating Instructions Manual

Remote Operation from a Touch Tone Phone

While outside, you can operate the Answering System
from any touch tone phone. A synthesized voice menu
will guide you through the Answering System (p. 61).
• To skip the voice menu and operate the unit directly,
see page 62.
Summary of remote operation
Call your unit from a touch tone phone.
Enter the remote code (p. 60) during or after the greeting.
• "Mailbox 1" and the number of new messages of Mailbox 1 are heard, and the
new messages will be played.
To access Mailbox 2 or 3, press [#] and the mailbox number ([2] or [3]) after
entering the remote code.
• The mailbox number and the number of new messages in the mailbox are
heard, and the new messages will be played.
After 3 seconds, the voice menu will start (p. 61).
Follow the menu or enter direct commands (p. 62).
To end remote operation, hang up.
To listen to messages in another mailbox, press [#] and the mailbox number ([1]
to [3]).
• The unit will announce the remaining recording time after playback if it is less than
3 minutes.
• The messages are saved.
• If the unit announces "No new messages", the mailbox has only old messages. If "No
messages" is announced, the mailbox has no messages.
For assistance, please call: 1-800-211-PANA(7262)
.
59