Installation; Connections - Panasonic KX-TG5210M Operating Instructions Manual

Installation

Connections

Base unit
• Base unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
• This unit will not function during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using the Panasonic KX-J66 T-adaptor.
Charger unit (KX-TG5212/KX-TG5213 only)
• Charger unit: USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No.
KX-TCA1-G).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
12
Raise the antennas.
Fasten the AC adaptor cord.
Bottom of the base unit
Single-Line Telephone Jack (RJ11C)
Telephone Line Cord
Power Outlet (AC 120 V, 60 Hz)
AC Adaptor
AC Adaptor
Hook
Power Outlet
(AC 120 V, 60 Hz)