Panasonic KX-TG1032SK Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Telephone System
  5. KX-TG1032SK
  6. Service manual

Panasonic KX-TG1032SK Service Manual

Telephone equipment expandable digital cordless answering system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Telephone Equipment
KX-TG1032SK
Model No.
KX-TGA101S
Expandable Digital Cordless Answering
System
S: Silver Version
(for U. S. A.)
© Panasonic System Networks Co., Ltd. 2010
Unauthorized copying and distribution is a violation
of law.
ORDER NO. KM41003051CE
F13

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TG1032SK

Summary of Contents for Panasonic KX-TG1032SK

  • Page 1 ORDER NO. KM41003051CE Telephone Equipment KX-TG1032SK Model No. KX-TGA101S Expandable Digital Cordless Answering System S: Silver Version (for U. S. A.) © Panasonic System Networks Co., Ltd. 2010 Unauthorized copying and distribution is a violation of law.
  • Page 2 KX-TG1032SK/KX-TGA101S...

  • Page 3: Table Of Contents

    KX-TG1032SK/KX-TGA101S TABLE OF CONTENTS PAGE PAGE 1 Safety Precaution ------------------------------------------------ 4 15 Exploded View and Replacement Parts List ----------- 76 1.1. For Service Technicians --------------------------------- 4 15.1. Cabinet and Electric Parts (Base Unit) ------------- 76 2 Warning -------------------------------------------------------------- 4 15.2. Cabinet and Electric Parts (Handset) --------------- 77 2.1.

  • Page 4: Safety Precaution

    KX-TG1032SK/KX-TGA101S 1 Safety Precaution 1.1. For Service Technicians • Repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires, injury or electric shock, which can be caused by improper repair work.

  • Page 5: Discarding Of P. C. Board

    KX-TG1032SK/KX-TGA101S 2.2.1. Suggested PbF Solder There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper (Sn+Ag+Cu), you can also use Tin and Copper (Sn+Cu) or Tin, Zinc, and Bismuth (Sn+Zn+Bi). Please check the manufacturer’s specific instructions for the melting points of their products and any precautions for using their product with other materials.

  • Page 6: Specifications

    KX-TG1032SK/KX-TGA101S 3 Specifications Note: • Design and specifications are subject to change without notice. Note for Service: • Operation range: Up to 300 m outdoors, Up to 50 m indoors, depending on the condition. • Analog telephone connection: Telephone Line...

  • Page 7: Technical Descriptions

    KX-TG1032SK/KX-TGA101S 4 Technical Descriptions 4.1. Block Diagram (Base Unit)

  • Page 8: Circuit Operation (Base Unit)

    KX-TG1032SK/KX-TGA101S 4.2. Circuit Operation (Base Unit) 4.2.1. Outline Base Unit consists of the following ICs as shown in Block Diagram (Base Unit) (P.7). • DECT BBIC (Base Band IC): IC7 - Handling all the audio, signal and data processing needed in a DECT base unit...
  • Page 9 KX-TG1032SK/KX-TGA101S 4.2.2. Power Supply Circuit The power is supplied to the DECT BBIC, RF Module, EEPROM and Charge Contact from AC Adaptor (+6.5 V) as shown in Fig.101. The power supply is as follows; • DECT BBIC (IC7): CN2 (+6.5 V) → IC1 → Q9 → IC7 CN2 (+6.5 V) →...
  • Page 10 KX-TG1032SK/KX-TGA101S 4.2.3. Telephone Line Interface <Function> • Bell signal detection • Clip signal detection • ON/OFF hook circuit Bell & Clip (: Calling Line Identification Presentation: Caller ID) signal detection: In the standby mode, Q3 is open to cut the DC loop current and decrease the ring load.

  • Page 11: Block Diagram (Handset)

    KX-TG1032SK/KX-TGA101S 4.3. Block Diagram (Handset) SPEAKER RXDA Speech Burst Decoding Decoding TXDA RECEIVER Speech Burst Module Encoding Encoding RSSI ADPCM SYDA Codec SYEN Analog Interface Filter SYCL Front Headset CHARGE(+) CHARGE XTAL CHARGE CHARGE CIRCUIT CONTACTS CHARGE DETECT Q4,Q5,Q9 10.368...

  • Page 12: Circuit Operation (Handset)

    KX-TG1032SK/KX-TGA101S 4.4. Circuit Operation (Handset) 4.4.1. Outline Handset consists of the following ICs as shown in Block Diagram (Handset) (P.11). • DECT BBIC (Base Band IC): IC1 - All data signals (forming/analyzing ACK or CMD signal) - All interfaces (ex: Key, Detector Circuit, Charge, DC/DC Converter, EEPROM, LCD) •...

  • Page 13: Circuit Operation (Charger Unit)

    KX-TG1032SK/KX-TGA101S 4.5. Circuit Operation (Charger Unit) 4.5.1. Power Supply Circuit The power supply is as shown.

  • Page 14: Signal Route

    KX-TG1032SK/KX-TGA101S 4.6. Signal Route...
  • Page 15 KX-TG1032SK/KX-TGA101S...

  • Page 16: Location Of Controls And Components

    KX-TG1032SK/KX-TGA101S 5 Location of Controls and Components Refer to the Operating Instructions. Note: You can download and refer to the Operating Instructions (Instruction book) on TSN Server. 6 Installation Instructions Refer to the Operating Instructions. Note: You can download and refer to the Operating Instructions (Instruction book) on TSN Server.

  • Page 17: Service Mode

    KX-TG1032SK/KX-TGA101S 8 Service Mode 8.1. Engineering Mode 8.1.1. Base Unit...
  • Page 18 KX-TG1032SK/KX-TGA101S Frequently Used Items (Base Unit) ex.) Items Address Default Data New Data Remarks Frequency 00 01 Use these items in a READ-ONLY mode to confirm the contents. Careless rewriting may 00 10~00 14 Given value cause serious damage to the computer system.
  • Page 19 KX-TG1032SK/KX-TGA101S 8.1.2. Handset...
  • Page 20 KX-TG1032SK/KX-TGA101S Frequently Used Items (Handset) ex.) Items Address Default Data New Data Possible Adjusted Possible Adjusted Remarks Value MAX (hex) Value MIN (hex) Battery Low 00 04 (*2) Frequency 00 01 00 10~00 14 Given value Note: (*1) When you enter the address or New Data, please refer to the table below.

  • Page 21: Copying Phonebook Items When Repairing

    KX-TG1032SK/KX-TGA101S 8.2. Copying Phonebook Items when Repairing You can copy the handset phonebook to another (compatible Panasonic) handset. This will help to save the original phonebook data which the customer has registered. Refer to the following procedures. Note: • BS=Base Unit, HS=Handset •...
  • Page 22 KX-TG1032SK/KX-TGA101S Note: • BS=Base Unit, HS=Handset • If the max number of handsets are already registered to the base unit, a new handset cannot be registered. • To register the handset, refer to Registering a Handset (P.34). • ToTo cancel the handset, refer to Deregistering a handset (P.34).

  • Page 23: How To Clear User Setting

    KX-TG1032SK/KX-TGA101S 8.3. How to Clear User Setting Units are reset to the Factory settings by this operation (Erase recorded Voice messages, stored Phone numbers, Caller list and etc.) Note: • The reset menus differ depending on the following operations. • This operation should not be performed for a usual repair.

  • Page 24: Troubleshooting Guide

    KX-TG1032SK/KX-TGA101S 9 Troubleshooting Guide 9.1. Troubleshooting Flowchart Cross Reference: Check Power (P.25) Bell Reception (P.35) Check Battery Charge (P.26) Check Link (P.27) Check Handset Transmission (P.35) Check Handset Reception (P.35) Signal Route (P.14) Check Caller ID (P.35) Check TAM Operation (P.36)
  • Page 25 KX-TG1032SK/KX-TGA101S 9.1.1. Check Power 9.1.1.1. Base Unit Is the AC Adaptor inserted into AC outlet? (*1) Cross Reference: Note: Power Supply Circuit (P.9) (*1) Refer to Specifications (P.6) for part number and supply voltage of AC Adaptor. 9.1.1.2. Handset Cross Reference:...
  • Page 26 KX-TG1032SK/KX-TGA101S 9.1.2. Check Battery Charge 9.1.2.1. Base Unit Cross Reference: Charge Circuit (P.12) 9.1.2.2. Handset Cross Reference: Check Power (P.25) Charge Circuit (P.12) 9.1.2.3. Charger Unit Cross Reference: Charge Circuit (P.12)
  • Page 27 KX-TG1032SK/KX-TGA101S 9.1.3. Check Link 9.1.3.1. Base Unit Cross Reference: Check Point (Base Unit) (P.37) Power Supply Circuit (P.9) Check the RF part (P.29)
  • Page 28 KX-TG1032SK/KX-TGA101S 9.1.3.2. Handset Cross Reference: Check Point (Handset) (P.37) Power Supply Circuit/Reset Circuit (P.12) Check the RF part (P.29)
  • Page 29 KX-TG1032SK/KX-TGA101S 9.1.4. Check the RF part 9.1.4.1. Finding out the Defective part After All the Checkings or Repairing 1. Re-register the checked Handset to the checked Base Unit, and Regular HS to Regular BU. Note: If you need to register a handset, refer to Registering a Handset (P.34)
  • Page 30 KX-TG1032SK/KX-TGA101S 9.1.4.2. RF Check Flowchart Each item (1 ~ 6) of RF Check Flowchart corresponds to Check Table for RF part (P.31). Please refer to the each item. Note: (*1) Base unit - refer to (D) of Check Point (Base Unit) (P.37) Handset - refer to (F) of Check Point (Handset) (P.37)
  • Page 31 KX-TG1032SK/KX-TGA101S 9.1.4.3. Check Table for RF part Item BU (Base Unit) Check HS (HandSet) Check Link Confirmation Normal 1. Register Regular HS to BU (to be 1. Register HS (to be checked) to Regular checked). HS, BU Mode: [Normal mode] 2.
  • Page 32 KX-TG1032SK/KX-TGA101S 9.1.4.4. TEST RANGE Check Circuit block which range is defective can be found by the following check. Item BU (Base Unit) Check HS (Handset) Check Range Confirmation TX TEST 1. Register Regular HS to BU (to be checked). 1. Register HS (to be checked) to Regular BU.
  • Page 33 KX-TG1032SK/KX-TGA101S 9.1.4.5. RF-BBIC Interface Signal Wave Form SYEN SYCL SYDA...
  • Page 34 KX-TG1032SK/KX-TGA101S 9.1.5. Registering a Handset 9.1.5.1. Deregistering a handset 9.1.6. Copying Handset Phonebook Items You can copy one or all of the phonebook items from one handset to another.
  • Page 35 KX-TG1032SK/KX-TGA101S 9.1.7. Check Handset Transmission 9.1.8. Check Handset Reception Cross Reference: Signal Route (P.14) Cross Reference: How to Check the Handset Speaker or Receiver (P.55). Signal Route (P.14) 9.1.9. Check Caller ID Cross Reference: Signal Route (P.14) 9.1.10. Bell Reception 9.1.10.1.
  • Page 36 KX-TG1032SK/KX-TGA101S 9.1.11. Check TAM Operation A) How to change the Auto Disconnect activation (time) Some Telephone Company lines (fiber or cable) ON Hook and OFF Hook voltages are lower than conventional lines, which may cause a malfunction of Auto Disconnect detection. To solve this problem, try changing the Auto Disconnect activation through the procedures below.

  • Page 37: Troubleshooting By Symptom (Base Unit And Charger Unit)

    KX-TG1032SK/KX-TGA101S 9.2. Troubleshooting by Symptom (Base Unit and Charger Unit) 9.2.1. Check Point (Base Unit) Please follow the items below when BBIC or EEPROM or FLASH is replaced. Note: After the measuring, suck up the solder of TP. *: The Setting Method of JIG (Base Unit) (P.46) is required beforehand.

  • Page 38: Disassembly And Assembly Instructions

    KX-TG1032SK/KX-TGA101S 10 Disassembly and Assembly Instructions 10.1. Disassembly Instructions 10.1.1. Base Unit...
  • Page 39 KX-TG1032SK/KX-TGA101S...
  • Page 40 KX-TG1032SK/KX-TGA101S 10.1.2. Handset...
  • Page 41 KX-TG1032SK/KX-TGA101S 10.1.3. Charger Unit...
  • Page 42 KX-TG1032SK/KX-TGA101S...

  • Page 43: How To Replace The Handset Lcd

    KX-TG1032SK/KX-TGA101S 10.2. How to Replace the Handset LCD...

  • Page 44: How And Where To Fix The Spacer

    KX-TG1032SK/KX-TGA101S 10.3. How and Where to fix the spacer...
  • Page 45 KX-TG1032SK/KX-TGA101S...

  • Page 46: Measurements And Adjustments

    KX-TG1032SK/KX-TGA101S 11 Measurements and Adjustments This chapter explains the measuring equipment, the JIG connection, and the PC setting method necessary for the measurement in Troubleshooting Guide (P.24) 11.1. Equipment Required • Digital multi-meter (DMM): it must be able to measure voltage and current.
  • Page 47 KX-TG1032SK/KX-TGA101S 11.2.2. How to install Batch file into P.C. Note: • “****” varies depending on the country or models. 11.2.3. Commands See the table below for frequently used commands. Command name Function Example rdeeprom Read the data of EEPROM Type “rdeeprom 00 00 FF”, and the data from address “00 00”...

  • Page 48: Adjustment Standard (Base Unit)

    KX-TG1032SK/KX-TGA101S 11.3. Adjustment Standard (Base Unit) When connecting the simulator equipment for checking, please refer to below. 11.3.1. Component View R103 R152 C108 C105 C110 C106 C103 C107 C109 C104 C119 C120 IC10 C121 C128 C126 R109 R151 R110 C127...
  • Page 49 KX-TG1032SK/KX-TGA101S 11.3.2. Bottom View Note: (A) - (D) is referred to Check Point (Base Unit) (P.37) (*1) is referred to No.3 of Check Table for RF part (P.31)

  • Page 50: Adjustment Standard (Charger Unit)

    KX-TG1032SK/KX-TGA101S 11.4. Adjustment Standard (Charger Unit) When connecting the simulator equipment for checking, please refer to below. 11.4.1. Bottom View DC POWER 6.5 V GND (TP4) /2 W Digital Volt Meter...

  • Page 51: The Setting Method Of Jig (Handset)

    KX-TG1032SK/KX-TGA101S 11.5. The Setting Method of JIG (Handset) This section explains the PC setting to use command required in Check Point (Handset) (P.37). <Preparation> (PQZZ1CD505E), change following values • Serial JIG cable: PQZZ1CD300E* resistance. Then you can use it as a JIG Cable for both •...
  • Page 52 KX-TG1032SK/KX-TGA101S 11.5.2. How to install Batch file into P.C. Note: • “*****” varies depending on the country or models. 11.5.3. Commands See the table below for frequently used commands. Command name Function Example rdeeprom Read the data of EEPROM Type “rdeeprom 00 00 FF”, and the data from address “00 00”...

  • Page 53: Adjustment Standard (Handset)

    KX-TG1032SK/KX-TGA101S 11.6. Adjustment Standard (Handset) When connecting the simulator equipment for checking, please refer to below. 11.6.1. Component View Note: (A) - (F) is referred to Check Point (Handset) (P.37) (*1) is referred to No.3 of Check Table for RF part (P.31)

  • Page 54: Things To Do After Replacing Ic Or X'tal

    KX-TG1032SK/KX-TGA101S 11.7. Things to Do after Replacing IC or X'tal If repairing or replacing BBIC (FLASH type), EEPROM and X'tal, it is necessary to download the required data such as Programming data or adjustment data, etc in memory. The set doesn't operate if it is not executed.

  • Page 55: How To Check The Handset Speaker Or Receiver

    KX-TG1032SK/KX-TGA101S 11.8. How to Check the Handset Speaker or Receiver 1. Prepare the digital voltmeter, and set the selector knob to ohm meter. 2. Put the probes at the speaker terminals as shown below. 11.9. Frequency Table (MHz) BASE UNIT...

  • Page 56: Miscellaneous

    KX-TG1032SK/KX-TGA101S 12 Miscellaneous 12.1. How to Replace the Flat Package IC Even if you do not have the special tools (for example, a spot heater) to remove the Flat IC, with some solder (large amount), a soldering iron and a cutter knife, you can easily remove the ICs that have more than 100 pins.
  • Page 57 KX-TG1032SK/KX-TGA101S 12.1.3. How to Install the IC 1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins. *Check the accuracy of the IC setting with the corresponding soldering foil. 2. Apply flux to all pins of the FLAT PACKAGE IC.

  • Page 58: How To Replace The Llp (Leadless Leadframe Package) Ic

    KX-TG1032SK/KX-TGA101S 12.2. How to Replace the LLP (Leadless Leadframe Package) IC 12.2.1. Preparation • PbF (: Pb free) Solder • Soldering Iron Tip Temperature of 700°F ± 20°F (370°C ± 10°C) Note: We recommend a 30 to 40 Watt soldering iron. An expert may be able to use a 60 to 80 Watt iron where someone with less experience could overheat and damage the PCB foil.
  • Page 59 KX-TG1032SK/KX-TGA101S 12.2.4. How to Install the IC 1. Place the solder a little on the land where the radiation GND pad on IC bottom is to be attached. 2. Place the solder a little on the land where IC pins are to be attached, then place the IC.

  • Page 60: Terminal Guide Of The Ics, Transistors And Diodes

    KX-TG1032SK/KX-TGA101S 12.3. Terminal Guide of the ICs, Transistors and Diodes 12.3.1. Base Unit 12.3.2. Handset...

  • Page 61: Schematic Diagram

    KX-TG1032SK/KX-TGA101S 13 Schematic Diagram 13.1. For Schematic Diagram 13.1.1. Base Unit (Schematic Diagram (Base Unit_Main)) Notes: 1. DC voltage measurements are taken with voltmeter from the negative voltage line. 2. The schematic diagrams may be modified at any time with the development of new technology.

  • Page 62: Schematic Diagram (Base Unit_Main)

    KX-TG1032SK/KX-TGA101S 13.2. Schematic Diagram (Base Unit_Main) L2T L1T L1R LINE-DC Loop Current For BR For M 100k For BR 2.2k 2.7k 100k 180k K1000p TP-RLY1 L1T/TP-RLY2 1500p L2T/TP-RLY3 For JT 100k L1R/TP-RLY4 180k K1000p TP-RLY5 US-2 US-1 1500p +2.5V Caller ID, For NL +2.5V...
  • Page 63 KX-TG1032SK/KX-TGA101S ANT-2 ANT-1 GND-1 GND-2 GND-3 C122 R152 3.3V +3.3V GND1 GND14 R151 ANT2 GND13 1.5k VCCPA GND12 +2.5V GND2 GND11 TX DATA 10.368MHz IC10 GND3 GND10 RF UNIT VCC_OC ANT1 2.5V R112 RESET GND4 *RESET RSSI RSSI GND9 SYRI...

  • Page 64: Schematic Diagram (Base Unit_Operation)

    KX-TG1032SK/KX-TGA101S 13.3. Schematic Diagram (Base Unit_Operation) LED2T LED1T CN10-10(KEY1) CN10-9(LED2) CN10-8(VDD) CN10-7(LED1) CN10-6(ROW0) CN10-5(KEY0) CN10-4(ROW2) SKIP REPEAT ERASE CN10-3(ROW1) CN10-2 VOL_UP ANS_ON LOCATOR CN10-1 PLAY STOP VOL_DOWN KX-TG1032 SCHEMATIC DIAGRAM (Base Unit_Operation)
  • Page 65 KX-TG1032SK/KX-TGA101S Memo...

  • Page 66: Schematic Diagram (Handset)

    KX-TG1032SK/KX-TGA101S 13.4. Schematic Diagram (Handset) 3.3V Charge Current BATTERY +3.3V 3.3V BATT+ 5.6n 2.5V 1.8V +2.5V 2.5V +1.8V 1.8V BATT- 115kHz 5.6k (Talk Mode) 5.6k C149 CHG(+) CHARGE 2.2k Terminal (When on charge) 3.3k K0.01u C107 CHG(-) 1000p C109 0.022 +2.5V...
  • Page 67 KX-TG1032SK/KX-TGA101S ANT_G BATTERY GND1 GND14 10.368MHz R143 +2.5V ANT2 GND13 2.5V 1.5k VCCPA GND12 RESET GND2 GND11 GND3 GND10 RF Module VCC_OC ANT1 TX DATA GND4 *RESET RSSI RSSI GND9 CLK_G SYRI TXDA GND5 GND8 R51 NC RFCLK RX DATA...

  • Page 68: Schematic Diagram (Charger Unit)

    KX-TG1032SK/KX-TGA101S 13.5. Schematic Diagram (Charger Unit) SCHEMATIC DIAGRAM (Charger Unit)

  • Page 69: Printed Circuit Board

    KX-TG1032SK/KX-TGA101S 14 Printed Circuit Board 14.1. Circuit Board (Base Unit_Main) 14.1.1. Component View L1R/TP-RLY4 GND-1 GND-3 L1T/TP-RLY2 L2T/TP-RLY3 GND-2 C117 C124 ANT-2 ANT-1 C122 C125 C118 R106 TP23 C153 R102 C101 C140 C155 C102 R163 C112 C111 C129 R92 R91...
  • Page 70 KX-TG1032SK/KX-TGA101S 14.1.2. Bottom View VDD3 VDD2 VDD1 3.3 V 2.5 V 1.8 V VDD3 3.3V KX-TG103 SPEAKER VDD1 C136 C137 BLACK VDD2 C144 C139 C138 LINE-DC R153 2.5V R117 C154 R161 CHARGE J104 J102 J103 J101 C150 C148 C134 C143...

  • Page 71: Circuit Board (Base Unit_Operation)

    KX-TG1032SK/KX-TGA101S 14.2. Circuit Board (Base Unit_Operation) 14.2.1. Bottom View KX-TG103 REPEAT SKIP ANS_ON PQUP11503Z ERASE STOP PLAY LOCATOR VOL_DOWN VOL_UP CN10 KX-TG1032 CIRCUIT BOARD (Base Unit_Operation (Bottom View))
  • Page 72 KX-TG1032SK/KX-TGA101S Memo...

  • Page 73: Circuit Board (Handset)

    KX-TG1032SK/KX-TGA101S 14.3. Circuit Board (Handset) 14.3.1. Component View PQUP11501Z TG103xSR (TGA101) C137 C138 C152 RECEIVER R143 ANT_G RSSI (C58) CLK_G (10.368 MHz) C101 C128 C127 R201 POWER JTAG for JIG R125 2.5 V 3.3 V 1.8V 2.5V 3.3V R202 1.8 V...
  • Page 74 KX-TG1032SK/KX-TGA101S 14.3.2. Bottom View PQUP11501Z LED10 R141 R140 R142 LED3 LED2 LED1 SOFT_A SOFT_B SOFT_C TALK LEFT RIGHT CANCEL DOWN KX-TGA101 CIRCUIT BOARD (Handset (Bottom View))

  • Page 75: Circuit Board (Charger Unit)

    KX-TG1032SK/KX-TGA101S 14.4. Circuit Board (Charger Unit) 14.4.1. Component View PQLV30053Z PQUP11516Z CIRCUIT BOARD (Charger Unit (Component View)) 14.4.2. Bottom View CIRCUIT BOARD (Charger Unit (Bottom View))

  • Page 76: Exploded View And Replacement Parts List

    KX-TG1032SK/KX-TGA101S 15 Exploded View and Replacement Parts List 15.1. Cabinet and Electric Parts (Base Unit)

  • Page 77: Cabinet And Electric Parts (Handset)

    (*1) This cable is fixed by welding. Refer to How to Replace the Handset LCD (P.43). (*2) The rechargeable Ni-MH battery HHR-4DPA is available through sales route of Panasonic. (*3) Attach the spacer (No. 122) to the exact location described above.

  • Page 78: Cabinet And Electric Parts (Charger Unit)

    KX-TG1032SK/KX-TGA101S 15.3. Cabinet and Electric Parts (Charger Unit)

  • Page 79: Accessories

    KX-TG1032SK/KX-TGA101S 15.4. Accessories...

  • Page 80: Replacement Part List

    KX-TG1032SK/KX-TGA101S 15.5. Replacement Part List Safety Ref. Part No. Part Name & Description Remarks 1. RTL (Retention Time Limited) PQKE10455Z1 HOLDER, CHARGE TERMI- POM-HB NAL (R) Note: PQKE10474Y1 CASE, CHARGE TERMINAL PS-HB The “RTL” marking indicates that its Retention Time is...
  • Page 81 KX-TG1032SK/KX-TGA101S Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks ERJ3GEYJ822 8.2k ECUV1C104KBV 0.1 ERJ3GEYJ272 2.7k ECEA1CK101 ERJ12YJ120 ECEA0JKA331 ERJ12YJ270 ECUV1C104KBV 0.1 ERJ3GEYJ104 100k ECUV1H103KBV 0.01 ERJ3GEYJ473 ECUE1C103KBQ 0.01 ERJ3GEYJ104 100k ECUE1A104KBQ 0.1...
  • Page 82 KX-TG1032SK/KX-TGA101S 15.5.1.3. Operational P.C.Board Parts Safety Ref. Part No. Part Name & Description Remarks LED1 B3ACB0000139 LED LED2 B3ACB0000139 LED Safety Ref. Part No. Part Name & Description Remarks LED3 B3ACB0000139 LED LED10 B3ACB0000134 LED PCB2 PQWP2TG1032H OPERATIONAL P.C.BOARD ASS'Y (RTL)
  • Page 83 KX-TG1032SK/KX-TGA101S 15.5.3.2. Main P.C.Board Parts Safety Ref. Part No. Part Name & Description Remarks ECUE1A104KBQ 0.1 ECUV1A105KBV 1 Safety Ref. Part No. Part Name & Description Remarks ECUE1H101JCQ 100p ECUV1A105KBV 1 PCB200 PQWPTGA101CH MAIN P.C.BOARD ASS'Y (RTL) ECUV1A105KBV 1 (JACK)

This manual is also suitable for:

Kx-tga101s

Table of Contents