Panasonic KX-TG5210M Operating Instructions Manual page 66

Wall Mounting
To remove the wall mounting adaptor
While pushing down the RELEASE LEVERS (A), remove the adaptor (B).
1
RELEASE
LEVERS
Charger unit (KX-TG5212/KX-TG5213 only)
The charger can be wall mounted. Connect the AC adaptor. Install screws using the
wall template (see below). Mount the charger (
down to the right (
2.45 cm
31 ⁄
(
66
1
C
) until it is secured.
2.45 cm
⁄
31
( ")
32
Screws
To Power
Outlet
Wall Template for the Charger unit
")
32
2
A B
). Slide it down (
A
B
), then slide
C