Re-Registering The Handset; Hs Registration; Deregistration - Panasonic KX-TG5210M Operating Instructions Manual

Canceling Registration/Re-registration
4
Scroll to "Deregistration" by pressing
[d] or [B], then press the soft key (
5
Press [3][3][5] to delete the registration
memory.
• If you enter a wrong code, re-enter [3][3][5].
6
Press the soft key (
• The registration memory will be erased on both
the handset and the base unit.
• If the handset beeps 3 times, you entered a
wrong code.
Enter "335", then press the soft key (
• To register the handset to another base unit of
the same model, start from step 5 on page 70.
• "[-]" is shown on the top right of the display.
• After canceling registration, the handset cannot be used. If you want to use it
again, register the handset to the base unit by performing steps 5 and 6 on
page 70.

Re-registering the Handset

If you want to re-register the handset to the base unit or a different base unit of the
same model, you need to register it to that base unit. The handset will be given a new
extension number of that base unit. Only one handset can be registered at a time near
the base unit. Make sure the base unit and the other handsets are not being
used. Have both the handset and base unit nearby during registration.
If you have canceled handset registration at a previous base unit (p. 68), start
from step 5 on page 70.
1
Handset: Press [MENU].
2
Handset: Scroll to "Initial setting" by
pressing [d] or [B], then press the soft key
( ).
SELECT
3
Handset: Scroll to "Registration" by
pressing [d] or [B], then press the soft key
( ).
SELECT
4
Handset: Press the soft key (
registration".
For assistance, please call: 1-800-211-PANA(7262)
SELECT
).
O K
O K
Handset & Base Unit
) at "HS
SELECT

Deregistration

).
Deregistration
Enter code:335
Ex. Extension number 2
SPIPRIVACY1
IN USE
Handset [2]
Deregistered
).
Initial setting
Registration

HS registration

:335
[-]
69