TG2361JX.book 10 ページ 2009年12月17日 木曜日 午前11時55分
Installation
Installing the Battery in the Handset
1
Insert the battery (
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as indicated
by the arrow. Replace the old battery with a new one
(p. 11). Close the cover and charge the battery for 6 hours.
Battery Charge
Place the handsets on the base unit and
charger. Charge for 6 hours before
initial use.
• The unit beeps once, the CHARGE
indicator lights, and "Charging" is
displayed.
• When the battery is fully charged, "Charge
completed" is displayed.
Battery strength
You can confirm battery strength
on the handset display.
Battery strength is indicated by
the icons shown in the chart to
the right.
10
), and press it down until it snaps into the compartment (
2
1
Display prompt
5
6
7
074 (flashing)
8
OR
AND
CHARGE Indicator
Battery strength
Fully charged
Medium
Low
Needs to be recharged.
Discharged
2
).