Omron STC-MBS312POE Product Specifications And User's Manual page 68

Name
GevGVCPExtendedStatusCodes
[GevGVCPExtendedStatusCodesSelector]
GevGVCPPendingAck
GevPrimaryApplicationSwitchoverKey
GevGVCPExpendedIDMode
GevCCP
GevPrimaryApplicationSocket
GevPrimaryApplicationIPAddress
GevMCPHostPort
GevMCDA
GevMCTT
GevMCRC
GevMCSP
GevStreamChannelSelector
GevSCPInterfaceIndex
[GevStreamChannelSelector]
GevSCPHostPort
[GevStreamChannelSelector]
GevSCPSFireTestPacket
[GevStreamChannelSelector]
GevSCPSDoNotFragment
[GevStreamChannelSelector]
GevSCPSPacketSize
[GevStreamChannelSelector]
GevSCFTD [GevStreamChannelSelector]
GevSCPD [GevStreamChannelSelector]
GevSCDA [GevStreamChannelSelector]
GevSCSP [GevStreamChannelSelector]
STC-MBS312POE / STC-MCS312POE
Product Specifications and User's Guide
Description
Enables the generation of extended status codes.
Enables the generation of PENDING_ACK.
Controls the key to use to authenticate primary application switchover
requests.
Enables the extended IDs mode.
Controls the device access privilege of an application.
Returns the UDP source port of the primary application.
Returns the address of the primary application.
Controls the port to which the device must send messages.
Controls the destination IP address for the message channel.
Provides the transmission timeout value in milliseconds.
Controls the number of retransmissions allowed when a message
channel message times out.
This feature indicates the source port for the message channel.
Selects the stream channel to control.
Index of the logical link to use.
Controls the port of the selected channel to which a GVSP transmitter
must send data stream or the port from which a GVSP receiver may
receive data stream.
Sends a test packet.
The state of this feature is copied into the "do not fragment" bit of IP
header of each stream packet.
This GigE Vision specific feature corresponds to
DeviceStreamChannelPacketSize and should be kept in sync with it.
Controls the delay (in GEV timestamp counter unit) to insert between
each packet for this stream channel.
Controls the delay (in GEV timestamp counter unit) to insert between
each frame for this stream channel.
Controls the destination IP address of the selected stream channel to
which a GVSP transmitter must send data stream or the destination IP
address from which a GVSP receiver may receive data stream.
Indicates the source port of the stream channel.
No.18S113-03
68/70