Omron STC-MBS312POE Product Specifications And User's Manual page 58

Name
DeviceLinkSpeed
[DeviceLinkSelector]
DeviceLinkHeartbeatTimeout
[DeviceLinkSelector]
DeviceLinkCommandTimeout
[DeviceLinkSelector]
DeviceStreamChannelCount
DeviceStreamChannelSelector
DeviceStreamChannelType
[DeviceStreamChannelSelector]
DeviceStreamChannelEndianness
[DeviceStreamChannelSelector]
DeviceEventChannelCount
DeviceCharacterSet
DeviceReset
DeviceRegistersStreamingStart
DeviceRegistersStreamingEnd
DeviceRegistersEndianness
DeviceTemperatureSelector
DeviceTemperature
[DeviceTemperatureSelector]
TimestampReset
TimestampLatch
TimestampLatchValue
DeviceUserMemory
STC-MBS312POE / STC-MCS312POE
Product Specifications and User's Guide
Description
Indicates the speed of transmission negotiated on the specified Link.
Controls the current heartbeat timeout of the specific Link.
Indicates the command timeout of the specified Link.
Indicates the number of streaming channels supported by the device.
Selects the stream channel to control.
Reports the type of the stream channel.
Endianness of multi-byte pixel data for this stream.
Indicates the number of event channels supported by the device.
Character set used by the strings of the device's bootstrap registers.
Resets the device to its power up state.
Prepare the device for registers streaming without checking for
consistency.
Announce the end of registers streaming.
Endianness of the registers of the device.
Selects the location within the device, where the temperature will be
measured.
Device temperature in degrees Celsius (C).
Resets the current value of the device timestamp counter.
Latches the current timestamp counter into Timestamp Latch Value.
Returns the latched value of the timestamp counter.
Read / Write the user data from / to the non-volatile memory.
No.18S113-03
58/70