Table of Contents
Advertisement
10.18
Chunk Control
This function is attached additional image information to image data.
For example, the exposure time and gain information do not include in image data itself. However, Chunk data
transfers these parameters when image was acquiring.
GenICam Parameters
ChunkModeActive
ChunkSelector
ChunkEnable
10.19
Action Control
The multiple cameras control by one action signal.
GenICam Parameters
ActionQueueSize
ActionDeviceKey
ActionSelector
ActionGroupKey
ActionGroupMask
STC-MBS312POE / STC-MCS312POE
Product Specifications and User's Guide
IBoolean Type
Chunk control ON / OFF selection
Default: "False" (Off)
IEnumeration Type
Transfer Chunk data selection
Selection: "Image", "Offset X", "Offset Y", "Width", "Height", "Pixel Format",
IBoolean Type
Enable Chunk data that was selected at "Chunk Selector"
Selection: "True" (Enable Chunk data) and "False" (Disable Chunk data)
IInteger Type
Size of scheduled action command queue
IInteger Type
Control identifier of camera
IInteger Type
Action command application selection
Fixed as "0"
IInteger Type
Action command applies camera
* The camera executes action command when group key of action command
and group key of camera is matched.
IInteger Type
Select camera to apply action command
Logical AND of Group Mask of camera and Group Mask of action command is 1
for any bit of 32bits, camera executes action command.
"Gain", "Exposure Time", "Black Level", "Line Status All",
"Device Temperature", "Timer Value" and "Counter Value"
No.18S113-03
54/70
Advertisement
Table of Contents
