Table of Contents
Advertisement
Precautions for Use
• Even if the battery in the DT-X450 is already fully charged, charging will begin when
you set the DT-X450 in the Ethernet cradle. It may take several minutes for the fully
charged status to be indicated.
• In high- or low-temperature environments, charging may be restricted to protect the
battery pack. At such temperatures, the level of battery charge may not reach 100%
even when the charging status LED is green and charging is completed.
• Water or other moisture on the power contacts could cause sparking or an electric
shock, and soiled contacts could block the connection and impair charging
functionality. To ensure safety, clean the power contacts by wiping them off with a
dry cloth or cotton bud after you disconnect the AC adapter.
• When disconnecting the AC adapter from the mains power outlet and DT-X450, do
so by gripping the connector and not by pulling on the cord.
• Use only the AC adapter specified for use with this product.
Ethernet Cradle (HA-S62IO) Specifications
1. LAN specifications
Communications method : IEEE 802.3-compliant
Media type
2. Charging specifications
Charging method
Charging time
3. AC adapter specifications
Standard
Input
Output
4. Dimensions, weight
Dimensions
Weight
5. Operating environment
Operating temperature
Operating humidity
: 10base-T/100base-TX auto switched
: Constant-voltage constant-current charging
: Approx. 4 hours
: AD-S50400A
: 100-240V AC, 50/60 Hz, 0.7A
: 5V DC, 4A
: Approx. 102(W) × 140(D) × 131(H) mm
: Approx. 380g
: 0°C to 40°C
: 10-90% RH (condensation-free)
47
Advertisement
Table of Contents
