Triggering The Exploding Boxcar - Lionel Celebration Series Owner's Manual

All manuals and user guides at all-guides.com
Operating and servicing your train set
Setting the Exploding Boxcar (continued)
3. Place the sides into position as illustrated in Figure 11. When attaching the sides, tilt them
inward slightly so that the tabs on the sides can easily slide into the slots in the frame. Lift
the roof slightly as you position each side, then reposition the roof so that it holds the side
in place. The tabs at the top of the sides should be under the roof.
The sides are NOT interchangeable. Use the spacing between the tabs on the boxcar
Note!
sides and the slots in the frame to guide you as you assemble the sides.
Figure 11. Inserting the sides

Triggering the Exploding Boxcar

F ire when ready! Carefully remove the locking pin, then strike the side of the boxcar with an
object. The boxcar will fly into pieces!
Keep your hands and face clear of the boxcar when it is triggered. Watch out for
Caution!
the spring arm and flying pieces of the car!
29