Running your train
Operating your Christmas music boxcar
Y
our Musical Boxcar requires one nine-volt alkaline battery. To install the battery (not
included), simply pull away the sides of the body and lift it off the frame. Attach the battery
harness to the battery, then slide the battery into the holder. Replace the body onto the frame
To play the Christmas music, throw the switch on the bottom of the car to the ON position.
To play, slide the switch on
the bottom of the car to the
ON position
Figure 8. Battery installation and switch location
1. Gently pull the sides away from the
body so that the slots on the side of
the boxcar release the frame
2. Attach the connector
located inside the doors
and place the battery in
the holder
Battery
holder
12
Battery
harness