Config Opening Message - AOR The Superior AR820 0 Series Operating Manual

Use the main dial or
to accept the data and return to a standard display. Alternatively
to abort entry or

14-9 CONFIG Opening message

It is possible to display a welcome message while the AR8200 is powering up and collating its 'boot-up'
information. There are three options for opening message:
NORM
Normal message is displayed at switch-on: WELCOME TO THE NEW WORLD OF AR8200.
QUICK
Blank screen at switch-on.
USER
Four lines of 12 characters may be entered for display at switch-on. Initially they are configured
for you to enter OWNERS name and PHONE NUMBER but all lines may be over-written.
The "OPENING MESSAGE" is setup in the CONFIG menu.
To access the config menu
ten times to move the cursor to the
"OPENING MESSAGE" selection point. Use the main dial or
keys to toggle between NORM / QUICK / USER.
The key may used as a short cut to NORM (which is
the default).
to accept the data and return to a standard display
or to abort entry.
Alternatively if you have selected USER and wish to change the text comment
text input menu for the opening menu.
You may change all four lines of text in the usual
manner. Please refer to section 12-1 of this
manual for further information regarding text input.
to accept the data and return to
a standard display or
entry. When the AR8200 is switched off and back
on again, the new opening message will be
displayed.
keys or key to toggle between ON and OFF (the default is off).
to move to the next item on the config menu (OPENING MESSAGE).
to abort
.
Section 14-8, 14-9
to access the
111