Deleting All Select Scan Channels - AOR The Superior AR820 0 Series Operating Manual

Section 7-9-4, 7-9-5
If you wish to add more select scan channels once to move upward to the new end of the
list and repeat the process. or to exit the select scan menu.
It is possible to delete the entire select scan list in one go using the DELETE menu, this is very useful to
enable rapid changes to the select scan list content.

7-9-5 Deleting all select scan channels

Although it is possible to review and delete select scan channels in memory read and by using the select
scan menu, a quicker method is available should you wish to delete all select scan tags in one go. This
is particularly useful when you wish to start a new select scan list (making the select scan list almost like
a note pad).
The DELETE menu is used to delete all select scan channels in one go. To access the delete menu
. the key four times to display the "DELETE SEL-CH"
menu. If at least one select scan channel exists, a channel location will be displayed to the right of the
legend "SEL-CH Xxx" where "Xxx" represents the channel location, if no select scan channels exist the
legend "SEL-CH --" will be displayed.
to delete the select scan list, the "SEL-CH --" legend confirms deletion.
or or or or to exit the delete menu.
Note: Only the select scan 'tags' are deleted using this procedure, the memory channel
contents are not erased or altered in any other way.
73