Summary Of Keys - AOR The Superior AR820 0 Series Operating Manual

Wide range all mode receiver 530 khz ~ 2040 mhz
Table of Contents

Advertisement

Section 1-5-2

1-5-2 Summary of keys

The main keypad is located on the front cabinet of the AR8200 with other keys located on the left
hand side. When powered from internal batteries with the lamp configured to AUTO, the lamp will
automatically illuminate when keys are pressed and will stay illuminated for five seconds after the last
key press.
An optional CC8200 RS232 lead is required for computer control, the optional CO8200 lead is required
for copying data between two AR8200 radios, various optional SLOT CARDS are available which further
extend the AR8200 facilities (and menus).
PUSH this key to place the AR8200 into SEARCH mode, the LCD "SRCH" legend confirms operation.
linked search banks may be grouped, this is useful where a large frequency band has been split up into
smaller more manageable sizes for close scrutiny.
Additional search related parameters may be set up to optimise each search group independently using
this menu:-
DELAY
LEVEL
VOICE
FREE
AUTOSTORE
DELETE J
PUSH this key to place the AR8200 into MEMORY READ mode, the LCD legend "M.RD" confirms
selection.
be selected to be scanned in succession, effectively forming one large scan bank. Additional scan
related parameters may be set up to optimise each scan group independently using this menu:-
DELAY
LEVEL
VOICE
FREE
MODE SCAN
common letter in upper and lower case.
10
to access the bank link menu where up to ten different selections of
OFF / HOLD / 0.1s to 9.9s (default = OFF)
OFF / 1 to 255 (default = OFF)
OFF / 1 to 255 (default = OFF)
OFF / 1s to 60s (default = OFF)
ON / OFF (default = OFF)
(deletes the current data from bank J)
again to initiate SCAN, the LCD legend "SCAN" confirms selection
to access the bank link menu where up to ten groups of memories may
OFF / HOLD / 0.1s to 9.9s (default = OFF)
OFF / 1 to 255 (default = OFF)
OFF / 1 to 255 (default = OFF)
OFF / 1s to 60s (default = OFF)
ALL / WFM / NFM / SFM / WAM / AM
/ NAM / USB / LSB / CW (default = ALL)
to set the ratio of bank size between memory channels sharing a

Advertisement

Table of Contents
loading

This manual is also suitable for:

The superior ar-8200 mk3

Table of Contents