Memory Read "M.rd - AOR The Superior AR820 0 Series Operating Manual

Section 5-3, 5-4
The memory bank write protect may be toggled on/off using the SCAN environment menu accessed by
the key sequence
to toggle bank select on/off and
Please refer to section 7-8-6 of this manual for details on MEMORY BANK write PROTECT.
Note: Memory channel write protect prevents accidental over-writing and deletion of specific
memory channels but does not prevent loss of data due to memory resizing or when using the
optional external memory slot card.

5-4 Memory read "M.RD"

Once frequency and mode data has been stored into a memory location, its retrieval is quick and simple.
Let's assume that you wish to retrieve the frequency of 123.500 MHz which has been programmed into
to memory "E25" during an earlier example in the preceding section 5-2 of this manual.
to place the receiver into memory read mode, the legend "M.RD" appears toward the
top left of the LCD to confirm operation. The AR8200 will monitor whatever memory channel first appears
when you enter memory read.
The AR8200 will display memory channel, mode, frequency, tuning step, text comment (if one was used),
attenuator status, noise limiter status and AFC status. The memory channel last used (for memory write
or recall) will initially be displayed, If the desired memory channel is not immediately displayed it may be
recalled by keying in the required three digit location.
To recall memory channel "E25"
(there is no need to push enter).
To recall memory "b06" the CASE SHIFT key needs to be used to access the lower case bank,
enter). If you attempt to recall a memory which has no valid data (because it is blank) the next valid
memory channel will be displayed instead. Blank memory channels are ignored.
56
followed by four pushes of the
to accept the changes and exit the menu.
The "BANK/CH SEL" legend automatically appears
when the first key is pushed to remind you that you
are recalling memory channels in memory read
mode. Keypad memory recall requires a three digit
location, one letter for the bank and two numbers for
the channel. If you hesitate for more that 2 seconds
while recalling memory channels via the keypad the
sequence will time out, for more leisurely memory
recall use the
key.
keys.
(there is no need to push
the