Input And Output Settings; Connection With The External Devices; Setting Inputs And Outputs; Select Signal To Connect With Line Which Is Selected By Line Selector - IAI AT-140GE User Manual

Guru

12.4. Input and output settings

12.4.1. Connection with the external devices

The relation of the line input and output (Digital I/O) and the external terminal in
the JAI GigE Vision cameras is fixed. Refer to the chapter 6.1 for the details.
In the Control Tool, they are displayed as Line1-TTL Out 1.
Note: These settings are only available in the Expert and Guru setting layers.

12.4.2. Setting inputs and outputs

12.4.2.1 Select signal to connect with Line which is selected by Line selector

This function determines which signal is connected with Digital I/O (Line 1 through
Line 8). The following figure is an example of setting Line 5 –Opt In 1. In this case,
Line Source is the signal to connect with Line 5 -Opt In 1. But Frame Active is
available for only output and accordingly, it is not selectable in the Control tool.
Line Format is automatically set at Opto Coupled.
AT-140GE
- 66 -