12.4. Input and output settings
12.4.1. Connection with the external devices
The relation of the line input and output (Digital I/O) and the external terminal in
the JAI GigE Vision cameras is fixed. Refer to section 6.1 for the details.
In the Control Tool, they are displayed as Line1-TTL Out 1.
Note: These settings are only available in the Expert and Guru setting layers.
12.4.2. Setting inputs and outputs
12.4.2.1 Select signal to connect with Line which is selected by Line selector
This function determines which signal is connected with Digital I/O (Line 1 through
Line 8). The following figure is an example of setting Line 5 –Opt In 1. In this case,
Line Source is the signal to connect with Line 5 -Opt In 1. But Frame Active is
available for only output and accordingly, it is not selectable in the Control tool.
Line Format is automatically set at Opto Coupled.
The following figure is an example of setting output so that the signal output
from Line1 – TTL Out 1is selected from signals in the Line Source. In this case,
Exposure Activeis selected to output through TTL Out 1. TTL is automatically
selected as Line Format.
AT-200GE
- 66 -