Advertisement
Slave ID
Set up the MODBUS ID for DX router. Invalid in MC Master mode.
Mode
It's fixed to "MC ASCII" in MC master mode.
Timeout
Set up the timeout timer from 200ms to 5000ms. If the set value is out of range,
it will be automatically changed to its maximum or minimum value.
Scan Interval
Set up the time for scan interval, ranging from 50ms to 60000ms.
Add Mappings
Click the button to add a new mapping;
Delete All Mappings
Delete all mappings of RS-232 MC master mode
Export Configure List
Export the configure list to the file and save to local PC
Import Configure List
Open local file and import the configure list
Read/Write
Set up the access permissions for the mapped register address;
Read-only: The device regular read data from appointed registers in the
slave, but will not update the data to the slave
Write-only: The device updates the data to the slave when the registers
values were changed, but will not read the data from the slave
Read/write: The device regular read data from appointed registers in the
slave, will update the data to the slave when the registers values are
changed.
Slave ID
It's fixed to 0 in MC master mode.
Controller
It's fixed to "MITSUBISHI PLC" in MC master mode.
Address Type
The address type is D/M/X/Y; D for word type, M/X/Y for bit type
Slave Starting Address (decimal)
Set up the slave starting address for read/write the registers in MITSUBISHI
PLC.
Bit
Description
Cha p ter 3 In tr od ucti on to F unc tio ns
Default
0
Modbus RTU
200ms
30000ms
N/A
N/A
N/A
N/A
Read/Write
0
Delta DVP PLC
D
N/A
_3
3 - 3 9
Advertisement
Chapters
