Advertisement
D X-3 021 Se ri es Ind ustr ia l 4G C lo ud Ro u ter
Set the network protocol of the security tunnel.Options are TCP and UDP.
UDP: UDP has a faster data transfer speed. If the network is not lost
packet, please use this option
TCP: When the network packet loss is serious, it is recommended to
select TCP. After binding the cloud account, you can still change this
option, but you must disable the cloud service before changing. When the
agent is turned on, the user can only select TCP.
Cloud IP Range
_3
Display the Cloud IP Range. The Cloud IP Range is depended on the secure
tunnel setting. For the secure tunnel setting, please refer to 5.2.5 Tunnel
Network.
Cloud Netmask
Display the Cloud Netmask. The Cloud Netmask is depended on the secure
tunnel setting. For the secure tunnel setting, please refer to 5.2.5 Tunnel
Network.
Device IP
User can assign an IP address manually; remember that IP address should be
the same subnet as the secure tunnel setting. For the secure tunnel setting,
please refer to 5.2.5 Tunnel Network.
Notice
Users can log-in to http://www.DIACloudSolutions.com/ and register for a
DIACloud account.
In rare case, you can't access the web because the computer did not refresh the IP
and DNS after the activation, please re-plug the cable to resolve the issue.
3.6.2
Proxy Setting
If the user's networking environment requires outbound network connections to go through a HTTP or HTTPS proxy, user
can setup it in here.
3 - 7 6
Description
Default
UDP
N/A
N/A
N/A
Advertisement
Chapters
