Advertisement
D X-3 021 Se ri es Ind ustr ia l 4G C lo ud Ro u ter
-3x: Read or write input registers (Modbus function code: 04)
-4x: Read or write holding registers (Modbus function code: 03/16)
-Swap: Read or write holding registers, transposition store to DX router's
register in pairs
Slave Starting Address (decimal)
Set up the slave starting address for read/write the registers in a PLC.
Delta PLC: Enter the internal D register number. If you need to read /
write D0, please enter 0 here.
_3
Other: Enter the Hexadecimal or Decimal actual address. For example:
Holding Register: 400100, take 0100 (decimal) that is 64 (hex).
Bit
For X/Y type data of Delta AH/AS series, the address format is x1.x2, then x1
input to slave starting address column, x2 input to this column.
Device Starting Address (decimal)
Set up the device starting address (decimal, input range is from $2048 to
$4095 for word type data, input range is from M0 to M511 for bit type data). $ or
M specifies that the match must start at the beginning of a Device Starting
Address.
Length (1-123)
Set up the number of the continuous address followed by the default mapped
address will be read or write. Input range is from 1 to 64.
Operation
Click the +/- button to add mapping or delete mapping.
Edit
Click an item of register mapping forms that can be edited.
Serial Server-TCP Server
DX router act as a TCP Server, when received the packet from client, parse the packet and transmit to RS-232.
3 - 3 4
Description
Default
N/A
N/A
N/A
N/A
N/A
N/A
Advertisement
Chapters
