Advertisement
STP
STP is a network protocol that builds a logical loop-free topology for Ethernet
networks. The basic function of STP is to prevent bridge loops and the
broadcast radiation that results from them. If this STP is enabled, the traffic
usage will increase about 15Mbit in 24 hours.
PHY Auto Reset
Disable or enable the auto reset function when LAN IP has been changed.
3.2.7
WLAN Setting
DX-3021L9 supports Wi-Fi dongle via USB interface. After setup the WLAN in this page, Wi-Fi will be an uplink option
also.
Currently, only product DWA-131 of D-Link company is be support. If you want to enable Wi-Fi dongle function, please
insert the DWA-131 into USB and then set the working mode to station.
Click "Scan" button to show the available Wi-Fi AP list.
Description
Cha p ter 3 In tr od ucti on to F unc tio ns
Default
Disable
Disable
_3
3 - 1 7
Advertisement
Chapters
