Ricoh LANIER AP2610 Operator's Manual page 167

Table of Contents

Advertisement

❖ ❖ ❖ ❖ Warm-up Time:
Less than 19 seconds (23°C, 73F)
❖ ❖ ❖ ❖ Paper Capacity:
Standard paper tray
*2
Bypass Tray
Optional Paper Feed Unit × 2
Optional Envelope Feeder
*1
Paper weight: 60 – 105 g/m
*2
You can load up to 10 envelopes (55 – 157 g/m
*3
To use the Envelope Feeder Unit, the optional Paper Feed Unit is required. The
paper tray of the feed unit can be replaced with the Envelope Feeder Unit.
*4
For more information about envelopes, see p.33 "Types of Paper and Other Me-
dia".
❖ ❖ ❖ ❖ Paper Output Capacity:
250 sheets (80 g/m
❖ ❖ ❖ ❖ Memory:
Standard 32MB, up to 96MB (with the optional Memory Unit)
❖ ❖ ❖ ❖ Network (Basic model printer requires the optional Network Interface Board):
Topology: Ethernet (10BaseT/100BaseTX)
Protocol: TCP/IP, NetBEUI, IPX/SPX, AppleTalk
❖ ❖ ❖ ❖ Optional Equipment:
Common for the Basic model printer and the Network standard model
printer
• Paper Feed Unit Type 2600
• Envelope Feeder Type 2600
• 1-bin Shift Sort Tray Type 2600
• CS380 (Mailbox)
• AD410 (Duplex Unit)
• Memory Unit TypeB 64MB
• Hard Disk Drive Type 2600
• 1394 Interface Unit Type 4510
• 802.11b Interface Unit Type A
Unique for the Basic model printer
• Network Interface Board Type 2610
*3
2
(16 – 28 lb. bond)
2
, 20 lb. bond)
*1
2
250 sheets
(80g/m
, 20 lb.bond)
*1
2
100 sheets
(80g/m
, 20 lb.bond)
500 sheets × 2
*1
(80g/m
*4
60 envelopes
2
, 14 – 42 lb. bond) at the same time.
Specifications
2
, 20 lb.bond)
159
7

Advertisement

Table of Contents
loading

Table of Contents