Ricoh LANIER AP2610 Operator's Manual page 111

*3
The "WL.LAN Signal" menu appears only when "IEEE 802.11b" is selected in "LAN
Type" in the Host Interface menu.
While the printer is On Line, press { { { { Enter #} } } } , and then press { { { { Escape} } } } . Finally, press
*4
{ { { { Menu} } } } . You can access the "Menu Protect", "Series Prnt.Job", "Ppr.Size Error", and
"USB Setting" on the panel display.
*5
The "Duplex" menu appears only when the optional Duplex Unit is installed.
*6
The "IEEE 1394 Setup" menu appears only when the optional 1394 Interface Unit is
installed.
*7
The "IEEE 802.11b Setup" menu appears only when the optional 802.11b Interface
Unit is installed.
Menu Chart
6
103