Table of Contents
Advertisement
• ❍
Means that the size is supported but the paper size should be set with the con-
trol panel. There is no dial on the tray.
See p.40 "Loading Paper in the Bypass Tray"
See p.47 "Loading envelopes into the Envelope Feeder Unit"
• ✩
Means that the size is supported and indicated on the tray dial. Be sure to set
the paper size dial to match the actual paper size loaded in the tray.
• #
Means that the size is supported but not indicated on the tray dial. You
should set the tray dial to "p", and select the paper size with the control pan-
el.
• ❍*
Means that the supported size is approximately 3.55 - 12.00 inches in width,
and approximately 5.83 - 17.00 inches in length. The supported size may dif-
fer depending on the printer language you use. Use the printer driver to set
custom sizes. Set custom sizes with the control panel.
• #**
Means that the supported size is approximately 7.16 - 11.7 inches in width,
and approximately 5.8 - 17 inches in length. The supported size may differ de-
pending on the printer language you use. Use the printer driver to set custom
sizes. Set custom sizes with the control panel.
• X
means that the size is not supported.
❖ ❖ ❖ ❖ Paper weight and number of sheets to be set
Paper Tray
Paper Feed Unit Type 2600 (option)
Bypass Tray
Envelope Feeder Type 2600
*1
Confirm that the top of the stack is not higher than the limit mark indicated on the
side fence of the tray.
*2
The Envelope Feeder Unit requires the installation of the optional Paper Feed Unit.
Supported paper weight
2
60 - 105 g/m
(16 - 28 lb. bond)
2
60 - 105 g/m
(16 - 28 lb. bond)
2
52 - 162 g/m
(14 - 43 lb. bond)
*2
p.33 "Types of Paper and Other Media".
Paper and Other Media Supported by This Printer
Maximum number of
sheets (plain paper)
250 (80 g/m
500 (80 g/m
100 (80 g/m
For other kind of papers,
see p.33 "Types of Paper
and Other Media".
3
*1
2
, 20 lb. bond)
2
, 20 lb. bond)
2
, 20 lb. bond)
29
Advertisement
Table of Contents
