Table of Contents
Advertisement
f When performing the simultaneous input of the 4K image (resolution of 3 840 x 2 160 or 4 096 x 2 160) using the Interface Board for HDMI 2
input (Model No.: ET-MDNHM10C), it is necessary for the firmware version of the Interface Board for HDMI 2 input to be 2.00 or later. If the
version is earlier than 2.00, the simultaneous process is not performed even if corresponding signal is input. Consult your dealer regarding
the version update to the latest firmware.
For details on how to confirm the firmware version, refer to "How to confirm the firmware version of the Interface Board (optional)"
(x page 32).
f This may not function properly for some connected external devices.
f This may not function properly depending on the signal.
r [SIMUL INPUT SETTING] screen
Usage of each input signal is displayed under the setting items of [SLOT 输入] in the [SIMUL INPUT SETTING]
screen when [AUTO(x2-speed)] is set.
[SIMUL INPUT SETTING]
[AUTO(x2-speed)]
[HDMI 输入]
Set this item in accordance with the video signal input to the <HDMI 输入> terminal.
Setting [SIGNAL LEVEL] in [HDMI 输入]
1)
Press as to select [HDMI 输入].
2)
Press the <执行> button.
f The [HDMI 输入] screen is displayed.
3)
Press as to select [SIGNAL LEVEL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The HDMI signal level is displayed for 30 bits of input.
Setting [AUTO GAMMA SELECT] in [HDMI 输入]
Set this item when the gamma mode is to be automatically set based on the InfoFrame information added to the
video signal.
1)
Press as to select [HDMI 输入].
2)
Press the <执行> button.
f The [HDMI 输入] screen is displayed.
3)
Press as to select [AUTO GAMMA SELECT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
132 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Usage of the input signal
[1st FRAME INPUT]
[2nd FRAME INPUT]
Automatically sets the signal level.
Select this item when the signal output from the HDMI terminal of the external device (such as a Blu-
ray disc player) is input to the <HDMI 输入> terminal.
Select this item when the signal output from the DVI-D terminal of the external device (such as a
computer) is input to the <HDMI 输入> terminal using a conversion cable, etc.
Select this item also when the signal output from the HDMI terminal of a computer, etc., is input to the
<HDMI 输入> terminal.
Select this item when the gamma mode is to be automatically set to the one compatible with
HDR (High Dynamic Range) based on the InfoFrame information added to the video signal. In such
case, the [PICTURE] menu → [GAMMA] is set to [HDR ST2084-500], [HDR ST2084-1000], or
[HDR HLG].
Uses the signal for the corresponding input as a signal for the odd frame.
Uses the signal for the corresponding input as a signal for the even
frame.
Details
Advertisement
Table of Contents
