Table of Contents
Advertisement
Chapter 5 Operations — Using the information monitor function
Sub-menu item
[PROJECTOR]
[INFO MONITOR]
[VERSION]
6)
Press as to switch the item.
f The display items will switch each time you press the button.
[WIRED LAN]
[WIRELESS LAN]
7)
Press the <执行> button.
f The detailed item is displayed.
8)
Press as to switch the item.
f The display items will switch each time you press the button.
262 - ENGLISH
Detailed item
[PROJECTOR ID]
[PROJECTOR TYPE]
[SERIAL NUMBER]
[CONSOLIDATED RUNTIME]
[PROJECTOR RUNTIME]
[LIGHT RUNTIME]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
[SELF TEST]
[INPUT]
[SIGNAL NAME]
[ON SCREEN DISPLAY]
[SHUTTER]
[REMOTE2 STATUS]
[AC VOLTAGE]
[OPERATING MODE]
[MAX LIGHT OUTPUT LEVEL]
[LIGHT OUTPUT]
[DEFAULT]
[INPUT]
[SIGNAL NAME]
[AC VOLTAGE]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
[SHUTTER]
[OSD]
[IP ADDRESS(WIRED)]
[DIRECTION]
[BRIGHTNESS]
[MAIN VERSION]
[SUB VERSION]
[NETWORK VERSION]
Select this item when the information of the wired LAN is to be displayed.
Select this item when the information of the wireless LAN is to be displayed.
Details
Displays the ID number set to the projector.
Displays the type of the projector.
Displays the serial number of the projector.
Converts the total runtime of the light sources with [OPERATING
MODE] set to each item into the time used with the [NORMAL]
setting.
The consolidated runtime is used for a rough indication about when
to perform maintenance when the projector is used in combination
of each item in [OPERATING MODE].
Displays the runtime of the projector.
Displays the runtime of the light source.
Displays the intake air temperature status.
Displays the exhaust air temperature status.
Displays the self-diagnosis information.
Displays the detailed information when the <执行> button is pressed
while error/warning has occurred.
Displays the input terminal currently selected.
Displays the representative input terminal when one image is
displayed with multiple input signals.
Displays the input signal name.
Displays the status of on-screen display function. ([ON]: Display;
[OFF]: Hide)
Displays the status of the shutter. ([CLOSE]: Shutter function
enabled; [OPEN]: Shutter function disabled)
Displays the control status of the REMOTE2.
Displays the input supply voltage.
Displays the setting value of the [PROJECTOR SETUP] menu →
[OPERATION SETTING] → [OPERATING MODE].
Displays the setting value of the [PROJECTOR SETUP] menu →
[OPERATION SETTING] → [MAX LIGHT OUTPUT LEVEL].
Displays the setting value of the [PROJECTOR SETUP] menu →
[LIGHT OUTPUT].
Displays the display setting of the information monitor during normal
status. ([USER VIEW]: Display; [OFF]: Hide)
Displays the display status of each item during the USER VIEW
mode. ([ON]: Display; [OFF]: Hide)
Displays the direction of the text to display in the information
monitor. ([AUTO]: Automatic detection; [NORMAL]: Floor mount;
[FLIPPED]: Inverted upside down)
Displays the setting value of the [PROJECTOR SETUP] menu →
[INFO MONITOR SETTING] → [BRIGHTNESS].
Displays the main version of the firmware of the projector.
Displays the sub version of the firmware of the projector.
Displays the network version of the firmware of the projector.
Advertisement
Table of Contents
