Table of Contents
Advertisement
Note
f Switch the setting to [4K/30p] when proper image is not projected while [EDID SELECT] is set to [4K/60p/HDR] or [4K/60p/SDR] and the 4K
video signal is input.
f Switch the setting to [2K] when proper image is not projected while [EDID SELECT] is set to [4K/60p/HDR], [4K/60p/SDR], or [4K/30p] and
the 2K video signal or lower is input.
f For details of the signal described in EDID of [4K/60p/HDR], [4K/60p/SDR], [4K/30p], or [2K], refer to "List of DisplayPort compatible signals"
(x page 309).
Setting [EDID MODE] in [SLOT 输入] (DisplayPort input)
1)
Press as to select [SLOT 输入].
2)
Press the <执行> button.
f The [SLOT 输入] screen is displayed.
3)
Press as to select [DisplayPort1], [DisplayPort2], [DisplayPort3], or [DisplayPort4], and press the
<执行> button.
f The [DisplayPort1] screen, the [DisplayPort2] screen, the [DisplayPort3] screen, or the [DisplayPort4]
screen is displayed.
4)
Press as to select [EDID MODE].
5)
Press the <执行> button.
f The [DisplayPort EDID MODE] screen is displayed.
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
f Proceed to Step 11) when [DEFAULT] is selected.
7)
Press the <执行> button.
f The [RESOLUTION] screen is displayed.
8)
Press asqw to select [RESOLUTION].
f Select [1024x768p], [1280x720p], [1280x800p], [1400x1050p], [1600x900p], [1600x1200p], [1920x1080p],
[1920x1200p], [2048x1080p], [2560x1600p], or [3840x2400p].
9)
Press the <执行> button.
f The [VERTICAL SCAN FREQUENCY] screen is displayed.
10) Press qw to select [VERTICAL SCAN FREQUENCY].
f Select [60Hz], [50Hz], or [30Hz] when [3840x2400p] is selected for [RESOLUTION].
f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [2048x1080p] is selected for [RESOLUTION].
f Select [120Hz], [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for
[RESOLUTION].
f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g [3840x2400p], [2048x1080p], [1920x1080p]
11) Press the <执行> button.
f The confirmation screen is displayed.
12) Press qw to select [OK], and press the <执行> button.
Note
f The settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in [EDID STATUS].
f The resolution and vertical scanning frequency settings may also be required on your computer or video device.
f The computer, video device, or projector in use may require the power to be turned off and on again after configuring settings.
f A signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video
device.
146 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Standard setting.
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
Advertisement
Table of Contents
