Table of Contents
Advertisement
f The home position does not match with the optical image center position.
f The home position varies depending on the projection lens type. For details, refer to "Lens shift range" (x page 86).
f The home position of the Fixed-focus Lens (Model No.: ET-D75LE95C) may deviate from the designed position.
When operating from the lens shift adjustment screen
1)
Press the <默认> button on the remote control while displaying the lens shift adjustment screen.
f The confirmation screen is displayed.
2)
Press qw to select [OK], and press the <执行> button.
f [PROGRESS] is displayed in the [HOME POSITION] screen, and the projection lens is moved to the origin
position.
Note
f The [HOME POSITION] screen is not displayed when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set to [NOT
SELECTED].
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set
incorrectly. Change the setting if the type is different from the projection lens attached to the projector.
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION]
is not executed.
f The home position varies depending on the projection lens type. For details, refer to "Lens shift range" (x page 86).
f The home position of the Fixed-focus Lens (Model No.: ET-D75LE95C) may deviate from the designed position.
f The [HOME POSITION] screen can also be displayed by pressing the <镜头> button on the control panel or the <移位> button on the
remote control for three seconds or longer.
Chapter 3 Basic Operations — Projecting
ENGLISH - 85
Advertisement
Table of Contents
