Table of Contents
Advertisement
[1.0]
[1.8]
[2.0] - [2.8]
*1 When [PICTURE MODE] is set to [DYNAMIC], [USER], or [DICOM SIM.], [DEFAULT] cannot be selected.
Note
f DICOM is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
f In the following cases, the gamma mode is automatically set based on the InfoFrame information while displaying the image with the
InfoFrame information added, so the gamma mode cannot be selected. If the information necessary for supporting HDR (High Dynamic
Range) is not included in the InfoFrame information added to the displayed video signal, it will follow the [GAMMA] setting.
g When the [DISPLAY OPTION] menu → [HDMI 输入] → [AUTO GAMMA SELECT] is set to [ENABLE], and the HDMI input is selected
g When the [DISPLAY OPTION] menu → [DIGITAL LINK 输入] → [AUTO GAMMA SELECT] is set to [ENABLE], and the DIGITAL LINK
input is selected
g When [AUTO GAMMA SELECT] under the [DISPLAY OPTION] menu → [SLOT 输入] (HDMI input) is set to [ENABLE], and the HDMI
input corresponding to that setting is selected
g When [AUTO GAMMA SELECT] under the [DISPLAY OPTION] menu → [SLOT 输入] (DisplayPort input) is set to [ENABLE], and the
DisplayPort input corresponding to that setting is selected
Setting [HDR HLG SYSTEM GAMMA]
Set the system gamma to be applied to the [USER1], [USER2], and [HDR HLG] gamma modes. This system
gamma is defined by the ITU-R BT.2100 standard.
1)
Press as to select [GAMMA].
2)
Press qw or the <执行> button.
f The [GAMMA] individual adjustment screen is displayed.
3)
Press qw to select [USER1], [USER2], or [HDR HLG], and press the <执行> button.
f The [GAMMA] screen is displayed.
f When [HDR HLG] is selected, proceed to Step 5).
4)
Press as to select [HDR HLG SYSTEM GAMMA].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
f [1.00] - [1.62] can be set in increments of 0.01.
Changing the name of [USER1] or [USER2]
1)
Press as to select [GAMMA].
2)
Press qw or the <执行> button.
f The [GAMMA] individual adjustment screen is displayed.
3)
Press qw to select [USER1] or [USER2].
4)
Press the <执行> button.
f The [GAMMA] screen is displayed.
5)
Press as to select [GAMMA NAME CHANGE].
6)
Press the <执行> button.
f The [GAMMA NAME CHANGE] screen is displayed.
7)
Press asqw to select the text, and press the <执行> button to enter the text.
8)
Press asqw to select [OK], and press the <执行> button.
f The selected gamma name is changed.
Note
f When a name is changed, display of [USER1], [USER2] is also changed.
Chapter 4 Settings — [PICTURE] menu
Set so that images become as you like. [2.0] - [2.8] can be set in increments of 0.1.
ENGLISH - 105
Advertisement
Table of Contents
