Winding A Bobbin - JUKI LK-1900S-SS Instruction Manual

5-7. Winding a bobbin

(1) To wind a bobbin while the sewing machine is performing sewing
(2) For winding a bobbin only
 ❷ ❸
 ❷ ❸
For the LK-1903S, thread the machine after removing the button and the needle.
Thread the bobbin winder and wind the bobbin
thread onto the bobbin as illustrated in the figure.
❻
1) Press READY key
2) Press work PRESSER and WINDER key
3) Press ▼ key
4) When you depress the pedal, the sewing ma-
❺
❻ ❾
5) Depress the pedal switch again or press RESET
6) Press READY key
－ －
23
READY LED  .
❺ and select lowering of the work clamp.
Selection cannot be performed when the
SET READY LED is lit up.
❻ . The bobbin winding
screen is displayed.
chine starts rotating.
❸ to stop the sewing machine.
key
❾ to exit from the bobbin winding screen.
Bobbin winder does not work immediately
after turning ON the power. Perform the
bobbin winding after setting pattern No.
or the like once, pressing the READY key
❷ , and making the SET READY
LED  light up.
❷ to turn off SET
❷ and RETURN key